Links. ABB 6256/1-WL HA-S-1-WL, HA-S-1-WL, HA-S-2-WL

Commissioning

6.4 Links

The radiator thermostat can be linked with other free@home devices, so that these can then be used as "Extension unit" to remote control the heating mode and the setpoint value of the radiator thermostat.

The temperature measurement and regulation continues to be carried out in this mode locally in the radiator thermostat.

The following components can be linked with a radiator thermostat as extension unit.

■ free@home Touch 7"

■ free@home Touch 4.3"

■

Room temperature controller

■

Wireless room temperature controller

■

ABB-free@home ® app

These can be linked with each other via the "Devices" allocation function.

The linking is made via the linking function of the Web-based user interface of the System Access Point, which is also integrated in the "Devices" page.

Linking actuator and sensor (extension unit)

Fig. 13: Linking actuator and sensor

1. On the working area select the sensor [1] that is to be linked with the actuator.

2. Select the actuator [2] that is to be served by the sensor.

3. Save the entries with the tick at the bottom right [3].

A blue connecting line indicates the link between the two devices. The configuration is now transmitted automatically to the devices. The transmission can, depending on the number of affected devices, take a number of seconds. During the transmission a progress bar is displayed around the devices affected.

Product manual 2CKA001473B9364 │ 28