Technical Specifications. Graco 3A5379B, Electric Supply System for Sealants and Adhesives

Add to My manuals
52 Pages

advertisement

Technical Specifications. Graco 3A5379B, Electric Supply System for Sealants and Adhesives | Manualzz

Technical Specifications

Technical Specifications

Electric Supply System

Air Inlet Sizes

D60 - 3 in. dual post, 16 gal. (60 L), 5 gal. (20 L), 30 gal. (115 L)

US Metric

Maximum air input pressure (supply system)

D60 - 3 in. dual post, 16 gal. (60 L), 5 gal. (20 L), 30 gal. (115 L)

Maximum fluid, air working pressure and weight (dis placement pump)

Pump Wetted parts

150 psi 1.0 MPa, 10 bar

For Check-Mate pump packages, see the Check-Mate Pump

Instructions-Parts manual.

For Check-Mate displacement pumps, see the Check-Mate

Displacement pumps Instructions-Parts manual.

3/4 in. npt(f)

Electric Pumps

Maximum continuous cycle rate

(To prevent premature pump wear, do NOT exceed maximum recommended speed of fluid pump)

Weight

Operating temperature range

Input voltage

Input current

Oil capacity†

Oil specification†

Maximum force

Noise (dBa)

Sound data

US Metric

33 cycles per minute

115 lb

23° to 120° F

52 kg

-5° to 50° C

200-240 VAC, single phase, 50/60 Hz

20A maximum

1.5 quarts 1.4 liters

Graco part number 16W645

ISO 220 silicone-free synthetic EP gear oil†

4200 lbf 18.7 kN

74 dB

† The driver gear-box is shipped from the factory pre-filled with oil. Additional oil must be purchased separately.

3A5379B 51

advertisement

Related manuals