Appendix C - DM Run Screens Overview. Graco 3A2894U, ExactaBlend AGP Advanced Glazing Proportioner

Add to my manuals
80 Pages

advertisement

Appendix C - DM Run Screens Overview. Graco 3A2894U, ExactaBlend AGP Advanced Glazing Proportioner | Manualzz

Appendix C - DM Run Screens Overview

Appendix C - DM Run Screens Overview

If the DM is showing a Setup screen, press to

access the Run screens. See the DM Screen Naviga tion Diagram on page 18.

Purge/Prime

This screen allows the pumps to be run independently.

NOTE: All machine alarms are disabled when this screen is displayed on the DM.

NOTE: You can also press

Run screens.

or to access the

Home

This screen shows the current ratio and allows the user to access other screens.

• Press the corresponding to deactivate or acti vate the desired pump for operation.

NOTE: The screen below shows only the catalyst (B) pump selected.

• Press ratio.

or to increase or decrease the

• Press the corresponding screen or to toggle an option.

to access another

• Shows the current state of the machine (okay/not okay).

3A2894U 69

Appendix C - DM Run Screens Overview

Alarm Log

This screen displays the last 70 errors that have occurred.

Calibration Check

This screen displays the ratio after a calibration check dispense.

NOTE: Production material cannot be dispensed from this screen.

• Press or to show other errors.

Totalizer

This screen displays the total amount of material (in kilograms) dispensed for each pump.

Information

This screen displays diagnostic information useful in troubleshooting.

70 3A2894U

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents