Technical Data. Graco 3A2894U, ExactaBlend AGP Advanced Glazing Proportioner

Add to my manuals
80 Pages


Technical Data. Graco 3A2894U, ExactaBlend AGP Advanced Glazing Proportioner | Manualzz

Technical Data

Technical Data

ExactaBlend AGP Advanced Glazing Proportioner

Maximum fluid working pressure :

MD2 or

Ultra-lite with flexible hose mixer Installed

Maximum fluid working pressure :

Ultra-lite with Tri-core mixer Installed

Minimum flow rate 6:1 to 14:1 ratio (by weight)

Minimum flow rate 1:1 ratio (by weight)

Maximum flow rate 1:1 to 14:1 ratio (by weight)

Incoming air pressure required*

Maximum operating temperature

Voltage range

Maximum amperage

Sound pressure**

Wetted parts


3000 psi

4000 psi


21 MPa, 207 bar

28 MPa, 276 bar

1.10 lb/min

2.21 lb/min

8.82 lb/min

80-100 psi

500 g/min

1000 g/min

4000 g/min

0.6-0.7 MPa, 6.0-7.0 bar

120° F 50° C

90-264 VAC 50/60 Hz 1 phase


82 dB(A)

Zinc-plated carbon steel, aluminum ram plate, nitrile rubber wipers, chrome, stainless steel, UHMW polyethylene, PTFE, nylon, Buna-N

Inlet/Outlet Sizes

Fluid outlet base

1/2 npt (f)

Fluid outlet catalyst

1/4 npt (f)

Air inlet size


S100 5 Gal./5 Gal. (20 L/20 L) Model

All other models


512 lb.

865 lb.

3/4 npt (f)

232 kg

392 kg

* Startup pressures and displacement per cycle may vary based on suction condition, discharge head, air pres sure, and fluid type.

** Sound pressure measured 3.3 feet (1 meter) from equipment.

Refer to specific component manual for more details.

Flow Rate is dependent on the applicator, material viscosity, and material temperature.

California Proposition 65


WARNING: Cancer and reproductive harm –

78 3A2894U


Technical Data

3A2894U 79


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF


Table of contents