Remove Gas Line. Graco 334145B, Glass Beap Dispense Kits


Add to my manuals
8 Pages

advertisement

Remove Gas Line. Graco 334145B, Glass Beap Dispense Kits | Manualzz

2

Removal

Removal

Remove Gas Line

Close manual gas shut-off valve on propane tank.

2. Disconnect gas tube (373) at valve fitting (151).

Discard the hose assembly.

151

373 ti24109a

1. Disconnect gas hose at the tee on the frame above the drive axle. This hose assembly goes to the rear screed burner manifold.

ti24134a

Remove Shroud Door

1. Remove four screws (105) that secure die shroud door (66) to die shroud. Remove and discard the door.

ti24110a ti24159a

66 105

334145B

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Enhanced visibility and safety on roads
  • Compatible with ThermoLazer 300TC and ProMelt machines
  • Easy installation and removal
  • Durable construction for long-lasting performance
  • Adjustable bead flow rate for customized application

Related manuals

Frequently Answers and Questions

What are the benefits of using Graco 334145B Glass Bead Dispense Kits?
Improved visibility and safety on roads, especially at night or in low-light conditions
Is the 334145B kit compatible with my existing pavement marking equipment?
Yes, the 334145B kit is designed to work with ThermoLazer 300TC and ProMelt machines.
How do I install the 334145B kit on my machine?
Refer to the included instruction manual for detailed installation instructions.
Can I adjust the amount of beads dispensed?
Yes, the 334145B kit allows for adjustable bead flow rate to meet specific application requirements.
How do I maintain the 334145B kit?
Regular cleaning and inspection are recommended to ensure optimal performance. Refer to the instruction manual for maintenance guidelines.

advertisement