Install Bead Box. Graco 334145B, Glass Beap Dispense Kits

Add to my manuals
8 Pages


Install Bead Box. Graco 334145B, Glass Beap Dispense Kits | Manualzz



Install Bead Box

1. Loosen screws and slide bead dispenser onto bead box support tube. Align bead box drive wheel with center of unit wheel.

3. Install torch holder.


2. Secure to the support tube using the bolts in the two bead box clamps.

4. Slide hose clamps onto bead hoses.

5. Connect hoses to bead hopper and manifolds. Use a screw driver to tighten hose clamps. ti24200a ti24201a

4 334145B


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Enhanced visibility and safety on roads
  • Compatible with ThermoLazer 300TC and ProMelt machines
  • Easy installation and removal
  • Durable construction for long-lasting performance
  • Adjustable bead flow rate for customized application

Related manuals

Frequently Answers and Questions

What are the benefits of using Graco 334145B Glass Bead Dispense Kits?
Improved visibility and safety on roads, especially at night or in low-light conditions
Is the 334145B kit compatible with my existing pavement marking equipment?
Yes, the 334145B kit is designed to work with ThermoLazer 300TC and ProMelt machines.
How do I install the 334145B kit on my machine?
Refer to the included instruction manual for detailed installation instructions.
Can I adjust the amount of beads dispensed?
Yes, the 334145B kit allows for adjustable bead flow rate to meet specific application requirements.
How do I maintain the 334145B kit?
Regular cleaning and inspection are recommended to ensure optimal performance. Refer to the instruction manual for maintenance guidelines.