Shutdown. Graco 313998G - HFR, Repair - Parts

Add to my manuals
94 Pages

advertisement

Shutdown. Graco 313998G - HFR, Repair - Parts | Manualzz

Shutdown

1.

Park pumps.

a.

From the Home screen, press

Standby mode.

and select b.

Press . Material will dispense. Pump will park automatically. Once pump is parked, pump will stop moving.

If a dispense gun with a trigger is installed, pulling the trigger will begin a park operation.

Material will dispense. Continue pulling the trigger until the pump stops moving.

2.

Press the power key on the ADM

3.

Turn main power switch (MP) to OFF position.

4.

Close A (Red) and B (Blue) side fluid supply valves

(FV).

FV ti9883a1

5.

Perform Pressure Relief Procedure on page 22.

6.

Shut down feed pumps as required. See feed pump manual.

313998G

Shutdown

21

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents