Flushing. Graco 313998L - HFR, Repair - Parts

Add to my manuals
94 Pages

advertisement

Flushing. Graco 313998L - HFR, Repair - Parts | Manualzz

Flushing

Flushing

Flush equipment only in a well-ventilated area. Do not dispense flammable fluids. Do not turn on heaters while flushing with flammable solvents.

• Flush out old fluid with new fluid, or flush out old fluid with a compatible solvent before introducing new fluid.

• Use the lowest possible pressure when flushing.

• All fluid components are compatible with common solvents. Use only moisture-free solvents. See

Technical Data on page 92 for wetted components.

See solvent manufacturers information for material compatibility.

• To flush feed hoses, pumps, and heaters separately from heated hoses, set PRESSURE RELIEF/DIS-

PENSE valves (SA, SB) to PRESSURE

RELIEF/CIRCULATION lines (N).

SA

. Flush through bleed

SB

N

N ti9880a1

• To flush entire system, circulate through gun fluid manifold (with manifold removed from gun).

• To prevent moisture from reacting with isocyanate, always leave the system dry or filled with a moisture-free plasticizer or oil. Do not use water. See

Important Two-Component Material Information on page 19.

313998L 23

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents