Clearing Misfeeds. Ricoh 3232C, 3224C, ISC1032c, DSc424, LD124c, Aficio LD132c, ISC1024c, DSc432, LD132c
Add to my manuals188 Pages
advertisement
ThemisC1_AE_zentai_pre_FM.book Page 119 Thursday, July 28, 2005 2:13 PM x
Clearing Misfeeds x
Clearing Misfeeds
R
CAUTION:
•
The fusing section of this machine might be very hot. Caution should be taken when removing misfed paper.
Important
❒
When clearing misfeeds, do not turn off the operation switch. If you do, your copy settings will be lost.
❒
To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
❒
If paper misfeeds occur frequently, contact your service representative.
Note
❒
More than one misfed area may be indicated. When this happens, check all the areas indicated. See the following charts:
• A, B, C,D,Y
⇒
p.120
• R (500-Sheet Finisher)
⇒
p.123
❒
Inside the finisher, or inside the front cover, there is a sticker explaining how to remove misfed paper.
❖
If paper is stuck to the printer's right side heat roller
6
When you open the internal cover of the duplex unit (right side of the machine), you can see the holes in the upper surface of the development unit (the part with the warning label). Normally, from here you will be able to see the orange heat roller. If you can see paper in this area, contact your service representative.
119
6
ThemisC1_AE_zentai_pre_FM.book Page 120 Thursday, July 28, 2005 2:13 PM
Troubleshooting
120
ThemisC1_AE_zentai_pre_FM.book Page 121 Thursday, July 28, 2005 2:13 PM x
Clearing Misfeeds
AFT005S
121
6
6
ThemisC1_AE_zentai_pre_FM.book Page 122 Thursday, July 28, 2005 2:13 PM
Troubleshooting
122
ThemisC1_AE_zentai_pre_FM.book Page 123 Thursday, July 28, 2005 2:13 PM x
Clearing Misfeeds
6
AFT006S
123
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 13 Copyrights and Trademarks
- 13 Trademarks
- 14 Information about Installed Software
- 20 How to Read This Manual
- 21 Safety Information
- 21 Safety During Operation
- 24 CAUTION
- 25 ENERGY STAR Program
- 27 Machine Types
- 29 Guide to Components
- 31 External Options
- 32 Internal Options
- 33 Control Panel
- 35 Display Panel
- 35 When the Authentication Screen is displayed
- 37 Turning On the Power
- 37 Turning On the Main Power
- 37 Turning On the Power
- 38 Turning Off the Power
- 38 Turning Off the Main Power
- 39 Saving Energy
- 41 Changing Modes
- 43 Multi-Access
- 47 Relationship between Document Server and Other Functions
- 48 Document Server Display
- 49 Using the Document Server
- 49 Storing Data
- 52 Changing a Stored Document's File Name, User Name, or Password
- 52 Selecting a Document
- 53 Searching for Stored Documents
- 54 Printing Stored Documents
- 57 Deleting Stored Documents
- 57 Viewing Stored Documents Using a Web Browser
- 58 Downloading Stored Documents
- 59 Settings for the Document Server
- 61 User Tools Menu (System Settings)
- 64 Accessing User Tools (System Settings)
- 64 Changing Default Settings
- 64 Exiting User Tools
- 65 Settings You Can Change with User Tools
- 65 General Features
- 68 Tray Paper Settings
- 71 Timer Settings
- 73 Administrator Tools
- 79 Address Book
- 82 Registering Names
- 82 Registering a Name
- 82 Changing a Registered Name
- 83 Deleting a Registered Name
- 84 Authentication Information
- 84 Registering a New User Code
- 85 Changing a User Code
- 85 Deleting a User Code
- 86 Displaying the Counter for Each User Code
- 86 Printing the Counter for Each User Code
- 87 Clearing the Number of Prints
- 88 Fax Destination
- 89 Registering a Fax Destination
- 91 Changing a Registered Fax Destination
- 92 Deleting a Registered Fax Destination
- 93 Registering an IP-Fax Destination
- 94 Changing a Registered IP-Fax Destination
- 95 Deleting a Registered IP-Fax Destination
- 96 E-mail Destination
- 96 Registering an E-mail Destination
- 97 Changing a Registered E-mail Destination
- 98 Deleting a Registered E-mail Destination
- 99 Registering Folders
- 99 Using SMB to Connect
- 103 Using FTP to Connect
- 106 Registering Names to a Group
- 106 Registering a New Group
- 107 Registering Names to a Group
- 107 Displaying Names Registered in Groups
- 108 Removing a Name from a Group
- 108 Changing a Group Name
- 109 Deleting a Group
- 109 Adding a Group to Another Group
- 109 Deleting a Group within a Group
- 111 Registering a Protection Code
- 111 Registering a Protection Code To a Single User
- 112 Registering a Protection Code To a Group User
- 113 Registering the Transfer Request
- 113 Registering a Transfer Station/Receiving Station
- 115 Changing a Registered Transfer Station/Receiving Station
- 116 Deleting a Registered Transfer Station/Receiving Station
- 117 Registering Authentication
- 117 SMTP Authentication
- 118 LDAP Authentication
- 119 If Your Machine Does Not Operate As You Want
- 119 General
- 122 Printing Problems
- 123 Document Server
- 123 Maintenance
- 124 Loading Paper
- 124 Loading Paper into Tray 1 and
- 124 Loading Paper into Tray 3 and 4 (optional)
- 125 Loading Paper into Large Capacity Tray (optional)
- 127 Adding Toner
- 128 Removing/Inserting Toner
- 131 Clearing Misfeeds
- 136 Changing the Paper Size
- 136 Changing the Paper Size of Tray 1 and
- 138 Changing the Paper Size of Tray 3 and 4 (option)
- 139 If you load a paper size that is not selected automatically
- 141 Adding Staples
- 141 500-Sheet Finisher
- 142 1000-Sheet Finisher
- 144 Removing Jammed Staples
- 144 500-Sheet Finisher
- 145 1000-Sheet Finisher
- 147 Replacing the Stamp Cartridge
- 148 Auto Colour Calibration
- 151 Dos and Don'ts
- 152 Saving Colour Copies
- 153 Toner
- 153 Handling Toner
- 153 Toner Storage
- 153 Used Toner
- 154 Where to Put Your Machine
- 154 Machine Environment
- 154 Moving
- 155 Power Connection
- 155 Access to the Machine
- 156 Maintaining Your Machine
- 156 Cleaning the Exposure Glass
- 156 Cleaning the Exposure Glass Cover
- 156 Cleaning the ADF
- 157 Cleaning the Guide Boards
- 158 Cleaning and Adjusting Internal Parts
- 158 Cleaning the Dustproof Glass
- 159 Other Functions
- 159 Inquiry
- 159 Changing the Display Language
- 160 Changing Paper Thickness Settings
- 161 Counter
- 161 Displaying the Total Counter
- 163 Entering Text
- 163 Available Characters
- 164 How to Enter Text
- 165 Mainframe
- 171 Options
- 171 500-Sheet Finisher
- 172 1000-Sheet Finisher
- 173 Bridge Unit
- 173 Shift Sort Tray
- 174 Duplex Unit
- 174 Internal tray 2 (1 bin tray)
- 175 Bypass Tray
- 175 Large Capacity Tray (LCT)
- 176 Paper tray unit
- 177 Copy Paper
- 177 Recommended Paper Sizes and Types
- 181 Non-recommended Paper
- 182 Paper Storage
- 183 INDEX