SECTION 4 – SPECIFICATIONS. HobartWelders OXY-FUEL OUTFITS 770502, 770974

SECTION 4 – SPECIFICATIONS

4-1.

Equipment Included With Medium-Duty Outfit 770502

4

5

6

161-135

1

7

2

8 9 10

3

12

11

Use only acetylene or propane gas and oxygen with this equipment.

Check valves are factory installed on the torch handle. Replace the check valves with the supplied flashback arrestors if the torch will be used frequently or for long peri-

ods (see Section 5-4).

1 Regulator - Oxygen (Green)

2 Regulator - Fuel (Red)

3 Flip-Front Goggles

4 T-Grade Hose With Fittings, 3/16 in. ID,

20 Ft (6.1 m)

5 Cutting Attachment

6 Cutting Tip No. 0

7 Spark Lighter

8 Flashback Arrestors, Torch Mount

9 Torch Handle With Check Valves

10 Welding Tip No.0

11 Tank Wrench

12 Tip Cleaner

4-2.

Equipment Included With Heavy-Duty Outfit 770974

6

7

8

9

5

4 1

2

3

10

11

12

Use only acetylene or propane gas and oxygen with this equipment.

Check valves are factory installed on the torch handle. Replace the check valves with flashback arrestors if the torch will be used frequently or for long periods (see

Section 5-4).

1 Regulator - Oxygen (Green)

2 Regulator - Fuel (Red)

3 Torch Handle With Check Valves

4 Cutting Attachment

5 Heating Tip No. 8

6 Welding Tip No. 2

7 Cutting Tips, No. 0, No. 1, No. 2

8 Flip-Front Goggles

9 Stainless-Finish Carrying Case

10 Tip Cleaner

11 Spark Lighter

12 T-Grade Hose With Fittings, 1/4 in. ID, 20

Ft (6.1 m)

13 O-Ring Set,

Replacement

Cutting Attachment

161-136

13

OM-251341 Page 9