Add to My manuals
116 Pages


<b>8. </b>TROUBLESHOOTING. AEG HE634070XB | Manualzz

7.2 Cleaning the hob

Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise, the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface.

Remove when the hob is sufficiently

cool: limescale rings, water rings, fat



Refer to Safety chapters.

8.1 What to do if...

stains, shiny metallic discoloration. Clean the hob with a moist cloth and a nonabrasive detergent. After cleaning, wipe the hob dry with a soft cloth.

Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth.


You cannot activate or operate the hob.

Possible cause

The fuse is blown.


Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.

Touch only one sensor field.

You touched 2 or more sensor fields at the same time.

STOP+GO operates.

There is water or fat stains on the control panel.

You put something on one or more sensor fields.

Refer to "Daily use".

Clean the control panel.

Remove the object from the sensor fields.

An acoustic signal sounds and the hob deactivates.

An acoustic signal sounds when the hob is deactivated.

Residual heat indicator does not come on.

The zone is not hot because it oper‐ ated only for a short time or the sen‐ sor is damaged.

The zone is hot.

If the zone operated sufficiently long to be hot, speak to an Authorised Service


Let the zone become sufficiently cool.

Automatic Heat Up does not op‐ erate.

The highest heat setting is set.

You cannot activate the outer ring.

It is normal that there is a dark area on the multiple zone.

The highest heat setting has the same power as the function.

First, activate the inner ring by chang‐ ing the heat setting.

There is a dark area on the multiple zone.



Related manuals

Download PDF


Table of contents