<b>9. </b>TECHNICAL DATA. AEG HE634070XB


Add to My manuals
116 Pages

advertisement

<b>9. </b>TECHNICAL DATA. AEG HE634070XB | Manualzz

Problem

The sensor fields become hot.

There is no sound when you touch the panel sensor fields.

comes on.

and a number come on.

You can hear a constant beep noise.

comes on.

Possible cause

The cookware is too large or you put it too near to the controls.

The sounds are deactivated.

Remedy

Put large cookware on the rear zones, if possible.

Activate the sounds. Refer to "Daily use".

Refer to "Daily use".

Child Safety Device or Lock oper‐ ates.

There is an error in the hob.

The electrical connection is incor‐ rect.

The second phase of the power sup‐ ply is missing.

Deactivate the hob and activate it again after 30 seconds. If comes on again, disconnect the hob from the electrical supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised

Service Centre.

Disconnect the hob from the electrical supply. Ask a qualified electrician to check the installation.

Check if the hob is correctly connected to the electrical supply. Remove the fuse, wait one minute, and insert the fuse again.

8.2 If you cannot find a solution...

If you cannot find a solution to the problem yourself, contact your dealer or an

Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The information about guarantee period and Authorised Service

Centres are in the guarantee booklet.

9. TECHNICAL DATA

9.1 Rating plate

Model HE634070XB

Typ 60 HAD C6 AO

Ser.Nr. .................

AEG

PNC 949 595 055 03

220 - 240 V 50 - 60 Hz

Made in: Germany

7.1 kW

14 ENGLISH

advertisement

Related manuals

Download PDF

advertisement

Table of contents