THE VARIOUS FUNCTION AND POSSIBILITIES. Electrolux FCBE32FW0, LUT6NF18S, LUT5NF28W0

• Before using your freezer, wipe all parts with a solution of warm water and a teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts to the freezer after cleaning.

• Use the adjustable front legs to make sure your appliance is level and stable. You can adjust the legs by turning them in either direction. This must be done before placing food in the appliance.

• Install the two plastic distance guides (the parts on the black vanes

-condenser- at the rear) by turning it 90° (as shown in the figure) to prevent the condenser from touching the wall.

• The distance between the appliance and back wall must be a maximum of 75 mm.

Before using your freezer

• When using your freezer for the first time, or after transportation, keep it in an upright position for at least 3 hours before plugging into the mains. This allows efficient operation and prevents damage to the compressor.

• Your freezer may have a smell when it is operated for the first time. This is normal and the smell will fade away when your freezer starts to cool.

PART - 2.

THE VARIOUS FUNCTION AND POSSIBILITIES

Information on No-Frost technology

No-frost freezers differ from other static freezers in their operating principle.

In normal freezers, the humidity entering the freezer due to opening the door and the humidity inherent in the food causes freezing in the freezer compartment. To defrost the frost and ice in the freezer compartment, you are periodically required to turn off the freezer, place the food that needs to be kept frozen in a separately cooled container and remove the ice gathered in the freezer compartment.

The situation is completely different in no-frost freezers. Dry and cold air is blown into the freezer compartment homogeneously and evenly from several points via a blower fan. Cold air dispersed homogeneously and evenly between the shelves cools all of your food equally and uniformly, thus preventing humidity and freezing.

Therefore your no-frost freezer allows you ease of use, in addition to its huge capacity and stylish appearance.

EN - 31 -

Display and Control Panel

1 2 3 4

Using the Control Panel

1. Freezer temperature set button

2. Super freeze symbol (Super freeze LED)

3. Alarm symbol (Alarm LED)

4. Freezer adjusted temperature indicator

Operating your Freezer

Alarm light

In case of a problem within the freezer, the alarm led will release red light.

Freezer Temperature Set Button

This button allows setting temperature of the freezer. In order to set values for freezer partition, press this button. Use this button also to activate super freeze mode.

Super Freezer Mode

When Would It Be Used?

• To freeze huge quantities of food.

• To freeze fast food.

• To freeze food quickly.

• To store seasonal food for a long time.

How To Use?

• Press temperature set button until super freezing light comes on.

• Super freezing led will light during this mode.

• Maximum amount of fresh food (in kilograms) to be frozen within 24 hours is shown on the appliance label.

• For optimal appliance performance in maximum freezer capacity, set the appliance to active super freeze mode 24 hours before you put the fresh food into the freezer.

During This Mode:

If you press temperature set button, the mode will be cancelled and the setting will be restored from -16.

Freezer Temperature Settings

• The initial temperature of the setting display is -18 °C.

• Press freezer setting button once.

• Every time you press the button, the setting temperature will decrease. (-16 °C, -18 °C,

-20 °C,.. super freezing)

EN - 32 -

• If you press freezer setting button until super freezer symbol is displayed on freezer.

• Settings display and you do not press any button within the following 3 seconds, super freezing will blink.

• If you keep on pressing, it will restart from last value.

Warnings about temperature adjustments

• It is not recommended that you operate your freezer in environments colder than 10°C in terms of its efficiency.

• Do not start another adjustment while you are already making an adjustment.

• Temperature adjustments should be made according to the frequency of door openings, the quantity of food kept inside the freezer and the ambient temperature in the location of your freezer.

• In order to allow your freezer to reach the operating temperature after being connected to mains, do not open the door frequently or place large quantities of food in the freezer.

Please note that, depending on the ambient temperature, it may take 24 hours for your freezer to reach the operating temperature.

• A 5 minute delay function is applied to prevent damage to the compressor of your freezer when connecting or disconnecting to mains, or when an energy breakdown occurs. Your freezer will begin to operate normally after 5 minutes.

• Your appliance is designed to operate in the ambient temperature (T/SN = 10°C - 43°C) intervals stated in the standards, according to the climate class displayed on the information label. We do not recommend operating your appliance out of the stated temperature limits in terms of cooling effectiveness.

Climate Class Ambient Temperature (°C)

T

ST

N

SN

Between 16 and 43 (°C)

Between 16 and 38 (°C)

Between 16 and 32 (°C)

Between 10 and 32 (°C)

Important installation instructions

T/SN Between 10 and 43 (°C)

This appliance is designed to work in difficult climate conditions (up to 43 degrees C or 110 degrees F) and is powered with ‘Freezer Shield’ technology which ensures that the frozen food in the freezer will not defrost even if the ambient temperature falls as low as -15 °C.

So you may then install your appliance in an unheated room without having to worry about frozen food in the freezer being spoilt. When the ambient temperature returns to normal, you may continue using the appliance as usual.

EN - 33 -