1.4.1 Backlit Touch Buttons. IEI Technology POC-17C-ULT3

POC-17C-ULT3 Medical Panel PC

1.4.1 Backlit Touch Buttons

The front panel of the POC-17C-ULT3 contains several backlit touch buttons that control audio volume, LCD brightness and some other system components.

Figure 1-3: Backlit Touch Buttons

The following table describes the function of each button.

Button Function

LCD on/off

(the touch buttons blink when the LCD is turned off)

− : Brightness down or lock/unlock OSD (with function key)

(minimum brightness: 5%)

+: Brightness up (maximum brightness: 100%)

− : Volume down

+: Volume up

Touch lock for cleaning: long-press for 3 seconds to lock or unlock the touch function of the screen. The touch buttons blink when the touch function is locked. The lock will be automatically disabled after 2 minutes.

Lock or unlock the touch buttons: long-press for 3 seconds to lock or unlock the touch buttons. The touch buttons blink when the touch buttons are locked.

Power on: long-press for 3 seconds. All touch buttons blink

3 times, and the system starts to boot.

Power off: long-press for 3 seconds. All touch buttons blink

3 times, and the system starts to shut down.

Note: Press the touch button for at least one second to activate it.

Table 1-2: Touch Button Functions

Page 5

POC-17C-ULT3 Medical Panel PC

1.5 Side Panels

The left side panel has two USB 2.0 ports which are protected by a waterproof cover and the IEI E-Window for I/O interface expansion by installing a PCIe Mini card. In addition, the

POC-17C-ULT3 equips with two 2 W speakers located on the side panels as shown in

Figure 1-4 .

Figure 1-4: Side View

1.6 Bottom Panel

The bottom panel of the POC-17C-ULT3 has the following connectors and switches

(

Figure 1-5 ):

ƒ 1 x 12 V ~ 28 V DC input power jack

ƒ 1 x RS-232/422/485 DB-9 connector

ƒ 1 x Barcode reader RJ-11 connector

ƒ 2 x GbE RJ-45 connectors

ƒ 4 x USB 3.0 connectors

ƒ 2 x USB 2.0 connectors

Page 6

POC-17C-ULT3 Medical Panel PC

ƒ 1 x HDMI output connector

ƒ 1 x AT/ATX switch

ƒ 1 x Reset button

Figure 1-5: Bottom Panel

1.7 Rear Panel

The rear panel contains the power button, camera cover on/off switch and the retention screw holes that support VESA 75/100 mounting (

Figure 1-6

). Besides, the rear panel has several screw holes for installing the optional items, such as the 3-in-1 reader. For detailed information on installation of the optional items, please refer to Chapter 3.

Figure 1-6: Rear View

Page 7

POC-17C-ULT3 Medical Panel PC

1.8 System Specifications

The technical specifications for the POC-17C-ULT3 systems are listed in

Table 1-3

.

LCD and Touchscreen

LCD Size

Max. Resolution

Brightness (cd/m

2

)

Contrast Ratio

LCD Color

Pixel Pitch (mm)

Viewing Angle (H-V)

Backlight MTBF

Touchscreen

Touch Controller

Surface Hardness

System

CPU

Memory

I/O Ports

Storage

17" (5:4)

1280 (W) x 1024 (H)

350

1000:1

16.7M (RGB 6-bit)

0.264 (H) x 0.264 (V)

170°/160°

30,000 hrs (LED backlight)

Projected capacitive type with USB interface

ILITEK

6H

Intel® Core™ i7-6600U/i5-6300U or Intel® Celeron® 3855U

Two 260-pin 2133/1866 MHz dual-channel non-ECC unbuffered DDR4 SO-DIMMs supported (system max. 32 GB)

Preinstalled with 4 GB memory

1 x 12 V ~ 28 V DC input jack

1 x Barcode reader connector (RJ-11)

1 x HDMI output connector

1 x RS-232/422/485 serial port (DB-9 connector)

2 x GbE LAN (RJ-45 connector)

4 x USB 3.0 connectors

4 x USB 2.0 connectors (2 on side panel)

Two 2.5” SATA 6Gb/s HDD bays

One mSATA (reserved, PCIe Mini interface)

Page 8

POC-17C-ULT3 Medical Panel PC

Audio

Webcam & Microphone

Expansion Interface

LED Indicator

Two 2 W speakers

2-megapixel CMOS front-facing camera with auto focus and digital microphone

One PCIe Mini slot (reserved)

RFID LED indicator (optional)

Other Features

Mifare RFID Optional Mifare 13.56 MHz card reader (with LED indicator)

1 x LCD on/off

1 x Brightness up

1 x Brightness down

1 x Volume up

1 x Volume down

1 x Touch lock for cleaning

Function Keys

Combinations:

1 x Lock/unlock OSD

1 x Power on/off

Light Sensor

Cooling Method

Ambient light sensor for panel brightness adjustment

Fanless

Connectivity

Wi-Fi and Bluetooth

LAN

IEEE 802.11a/b/g/n/ac 2T2R module with Bluetooth v4.1

(M.2 2230 A-E key module)

Two GbE LAN connectors

Physical

Construction Material

Mounting

PC+ABS plastic with anti-bacterial material

Wall, stand and arm mounting

VESA 75 mm x 75 mm or 100 mm x 100 mm

Net Weight 5.8 kg

Dimensions (W x H x D)

435 mm x 376 mm x 64.5 mm

Page 9

POC-17C-ULT3 Medical Panel PC

Environment

Storage/Transportation

Temperature -20ºC ~ 60ºC

Humidity 10% ~ 95% (non-condensing)

Pressure 700 hPa ~ 1060 hPa

Temperature 0ºC ~ 40ºC

Operating Humidity 10% ~ 95% (non-condensing)

Vibration

Shock

Pressure 700 hPa ~ 1060 hPa

1G

Operating Shock: 5G peak acceleration (11ms duration)

Non-Operating Shock: 15G peak acceleration (11ms duration)

IP 65 compliant front panel IP Level

Power

Power Input

Power Adapter

12 V ~ 28 V DC

120 W medical-grade power adapter

( P/N : 63040-010120-010-RS)

150 W medical-grade power adapter

( P/N : 63040-010150-400-RS)

Input : 100 V AC ~ 240 V AC,

47 Hz ~ 63 Hz, 1.4 A ~ 0.6 A

Input : 100 V AC ~ 240 V AC,

47 Hz ~ 63 Hz, 2 A ~ 0.85 A

Output : 19 V 6.32 A Output : 19 V 7.89 A

Table 1-3: System Specifications

Page 10

POC-17C-ULT3 Medical Panel PC

1.9 Dimensions

The POC-17C-ULT3 dimensions are shown below.

Figure 1-7: Dimensions (mm)

Page 11