5.11.1 SCR Driver. IEI Technology POC-17C-ULT3

POC-17C-ULT3 Medical Panel PC

5.11 3-in-1 Combo Reader Driver (Optional)

The drivers for the optional 3-in-1 combo reader are all located in the following folder of the driver CD: \Docs\12.Other\POCP-W22A-CR-R10 . Please follow the instructions below to install the drivers.

5.11.1 SCR Driver

Follow the steps below to install the SCR driver.

Step 1: Open the Device Manager window. Long press or right click Singular VCOM

Card Reader . Select Update Driver Software from the pop-up window.

Figure 5-16: Device Manager - Update Driver Software

Step 2: The Update Driver Software window appears. Select Browse my computer for driver software .

Page 95

POC-17C-ULT3 Medical Panel PC

Figure 5-17: Update Driver Software Window

Step 3: The following window appears. Press/Click the Browse button to specify the

SCR driver directory (\Docs\12.Other\POCP-W22A-CR-R10\SCR). Then, press/click the Next button.

Figure 5-18: Browse for Driver Software Window

Page 96

POC-17C-ULT3 Medical Panel PC

Step 4:

The following window ( Figure 5-19

) appears as the driver is installed.

Figure 5-19: Installing Driver Window

Step 5: After the driver installation process is complete, a confirmation screen appears.

Click Close to exit the program.

Figure 5-20: Driver Installation Complete Window

Page 97

POC-17C-ULT3 Medical Panel PC

Step 6: The Device Manager Window now shows the installed SCR device.

Step 0:

Figure 5-21: Device Manager Window – SCR Device

Page 98