B.1.4 Classification. IEI Technology POC-17C-ULT3

POC-17C-ULT3 Medical Panel PC

B.1.4

Classification

ƒ Power by Class I power supply (IEI, POC-17C-ULT3)

ƒ No Part.

ƒ No protection against the ingress of water: IPX0

ƒ Mode of operation: Continuous Operation

The equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide: Not AP or APG Category.

B.2 Maintenance and Cleaning Precautions

When maintaining or cleaning the POC-17C-ULT3, please follow the guidelines below.

WARNING:

If you dropped any material or liquid such as water onto the panel PC when cleaning, unplug the power cable immediately and contact your dealer or the nearest service center. Always make sure your hands are dry when unplugging the power cable.

CAUTION:

ƒ For safety reasons, turn-off the power switch and unplug the panel

PC before cleaning.

ƒ Do not scratch or rub the screen with a hard object.

ƒ Never use any of the following solvents on the medical panel PC.

Harsh chemicals may cause damage to the cabinet and the touch sensor.

Thinner Spray-type cleaner, Benzene, Wax, Abrasive cleaner,

Acid or Alkaline solvent.

Page 138