B.2.1 Maintenance and Cleaning. IEI Technology POC-17C-ULT3

POC-17C-ULT3 Medical Panel PC

B.2.1 Maintenance and Cleaning

Prior to cleaning any part or component of the POC-17C-ULT3, please read the details below.

ƒ To clean the POC-17C-ULT3, o remove dirt with a lightly moistened cloth. Then wipe the external chassis with a soft dry cloth. o use 75% ethanol alcohol to clean the external chassis.

ƒ Cleaning frequency: follow the cleaning method guidelines of the hospital.

ƒ Except for the LCD panel, never spray or squirt liquids directly onto any other components.

ƒ The interior of the POC-17C-ULT3 does not require cleaning. Keep fluids away from the POC-17C-ULT3 interior.

ƒ Never drop any objects or liquids through the openings of the

POC-17C-ULT3.

B.2.2 Cleaning Tools

Some components in the POC-17C-ULT3 may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the POC-17C-ULT3.

ƒ Cloth – Although paper towels or tissues can be used, a soft, clean piece of cloth is recommended when cleaning the POC-17C-ULT3.

ƒ Water/Ethanol alcohol – A cloth moistened with water or 75% ethanol alcohol can be used to clean the POC-17C-ULT3.

ƒ Using solvents – The use of solvents is not recommended when cleaning the

POC-17C-ULT3 as they may damage the plastic parts.

ƒ Cotton swabs - Cotton swaps moistened with water are excellent tools for wiping hard to reach areas.

ƒ Foam swabs - Whenever possible, it is best to use lint free swabs such as foam swabs for cleaning.

Page 139