2 UNPACKING. IEI Technology POC-W24C-ULT3

POC-W24C-ULT3 FHD Medical Panel PC

Chapter

2

2

Unpacking

Page 13

POC-W24C-ULT3 FHD Medical Panel PC

2.1 Unpacking

To unpack the medical panel PC, follow the steps below:

WARNING!

The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the medical panel PC has been properly installed. This ensures the screen is protected during the installation process.

Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the external (second) box.

Step 2: Open the external (second) box.

Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the internal (first) box.

Step 4: Lift the monitor out of the boxes.

Step 5: Remove both polystyrene ends, one from each side.

Step 6: Pull the plastic cover off the medical panel PC.

Step 7: Make sure all the components listed in the packing list are present. Step 0:

Page 14

POC-W24C-ULT3 FHD Medical Panel PC

2.2 Packing List

NOTE:

If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the

POC-W24C-ULT3 was purchased from or contact an IEI sales representative directly by sending an email to

[email protected]

.

The POC-W24C-ULT3 medical panel PC is shipped with the following components:

Image Quantity Item

1 POC-W24C-ULT3 medical panel PC

1

4

120 W/19 V medical-grade power adapter

( P/N : 63040-010120-010-RS) or

150 W/19 V medical-grade power adapter

( P/N : 63040-010150-400-RS)

( P/N : 32702-000200-100-RS)

Pan-head screw (M3*5) for HDD installation

( P/N : 44043-030051-RS)

Page 15

1 Quick Installation Guide

POC-W24C-ULT3 FHD Medical Panel PC

1 One Key Recovery CD

2.3 Optional Items

The following are optional components which may be separately purchased:

Item and Part Number

3-in-1 reader (smart card, magnetic card and fingerprint)

( P/N : MEDP-CR-R10)

Image

Handle

( P/N : MEDP-HD-R10)

Handle with 1D/2D barcode reader and reading light

( P/N : MEDP-HD-BR-R10)

Page 16

POC-W24C-ULT3 FHD Medical Panel PC

Item and Part Number

Handset (USB interface) and holder

( P/N : MEDP-HS-R10)

Image

VESA 100 wall mount kit (four M3*6 screws included)

( P/N : AFLWK-19B)

Arm

( P/N : ARM-31-RS)

Stand

( P/N : STAND-A21-R10)

EZ Stand with cabling hole, VESA 100

( P/N : MEDP-EZS-R10)

Page 17

POC-W24C-ULT3 FHD Medical Panel PC

Item and Part Number

Trusted platform module (assemble-to-order)

( P/N : MEDP-TPM-R10)

Image

Mifare RFID reader compliant with ISO 14443A, ISO

14443B and ISO 15693 protocols (assemble-to-order)

( P/N : MEDP-MF-RFID-R10)

Page 18