3.5.1 Using VoIP Handset. IEI Technology POC-W24C-ULT3

POC-W24C-ULT3 FHD Medical Panel PC

3.5.1 Using VoIP Handset

The VoIP handset is designed for Skype. To use the handset to place or receive a call via

Skype, please follow the steps below.

Step 1: Install the Skype program ( http://www.skype.com/en/ ).

Step 2: Select Other from the list of the driver CD. Double click the setup file in the

POCP-W22A-HS-R10_U-2000H folder to install the handset driver (

Figure 3-6 ).

Figure 3-6: Handset Driver Folder

Step 3:

Follow the step-by-step instruction of the installation wizard ( Figure 3-7

) to install the handset driver.

Page 25

POC-W24C-ULT3 FHD Medical Panel PC

Figure 3-7: Handset Driver Installation

Step 4: Launch Skype. Press the Allow access button on Skype (

Figure 3-8

) to allow handset API access.

Figure 3-8: Allow API Access

Page 26

POC-W24C-ULT3 FHD Medical Panel PC

API access can also be managed through Tools Æ Options Æ Advanced settings in Skype. See

Figure 3-9

.

Figure 3-9: Manage Program Access to Skype

Page 27

POC-W24C-ULT3 FHD Medical Panel PC

Step 5: The user can now use Skype via the handset. The function description of each button on the handset is listed in the following table.

Button Function

LED indicator :

Clear – no call activity

Blinking green – incoming call ringing

Steady green – active call

€

Hot key :

No call activity – launch Skype and select menus

* long-press the hot key for 2 seconds to turn off Skype

Ringing – terminate the incoming call

Active call – mute or unmute the handset microphone i j

No call activity – scroll up through incoming and outgoing call history

Active call – handset speaker volume up

No call activity – scroll down through incoming and outgoing call history

Active call – handset speaker volume down

Place, answer or hang up a call.

Table 3-1: Handset Button Functions

Page 28