4.1.1 Starting Setup. IEI Technology POC-W24C-ULT3

POC-W24C-ULT3 FHD Medical Panel PC

4.1 Introduction

The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed.

4.1.1 Starting Setup

The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. the key as soon as the system is turned on or the key when the “ Press DEL to enter SETUP ” message appears on the screen. 0.

If the message disappears before the DEL key is pressed, restart the computer and try again.

4.1.2 Using Setup

Use the arrow keys to highlight items, press E

NTER

to select, use the PageUp and

PageDown keys to change entries, press F1 for help and press E

SC

to quit. Navigation keys are shown in the following table.

Key Function

Up arrow Move to the item above

Down arrow Move to the item below

Left arrow Move to the item on the left hand side

Right arrow Move to the item on the right hand side

+ Increase the numeric value or make changes

Page 46

NOTE:

Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.