4.3.3 F81866 Super IO Configuration. IEI Technology POC-W24C-ULT3

POC-W24C-ULT3 FHD Medical Panel PC

4.3.3 F81866 Super IO Configuration

Use the F81866 Super IO Configuration

menu ( BIOS Menu 5 ) to set or change the

configurations for the serial ports.

Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.

Advanced

F81866 Super IO Configuration

Super IO Chip

> Serial Port 1 Configuration

> Serial Port 2 Configuration

F81866

Set Parameters of Serial

Port 1 (COMA)

---------------------

ÆÅ

: Select Screen

↑ ↓

: Select Item

Enter: Select

+/-: Change Opt.

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.

BIOS Menu 5: F81866 Super IO Configuration

4.3.3.1 Serial Port n Configuration

Use the Serial Port n Configuration

menu ( BIOS Menu 6 ) to configure the serial port n.

Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.

Advanced

Serial Port 1 Configuration

Serial Port

Device Settings

Change Settings

[Enabled]

IO=3F8h; IRQ=4

[Auto]

Enable or Disable Serial

Port (COM)

---------------------

ÆÅ

: Select Screen

↑ ↓

: Select Item

Enter: Select

+/-: Change Opt.

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.

BIOS Menu 6: Serial Port n Configuration Menu

Page 52

POC-W24C-ULT3 FHD Medical Panel PC

4.3.3.1.1 Serial Port 1 Configuration

Î Serial Port [Enabled]

Use the Serial Port option to enable or disable the serial port.

Î

Disabled

Î

Enabled D EFAULT

Disable the serial port

Enable the serial port

Î Change Settings [Auto]

Use the Change Settings option to change the serial port IO port address and interrupt address.

Î

Auto D EFAULT

The serial port IO port address and interrupt address are automatically detected.

Î

IO=3F8h; IRQ=4 Serial Port I/O port address is 3F8h and the interrupt address is IRQ4

Î

IO=3F8h;

IRQ=3, 4, 5, 6, 7,

9, 10, 11, 12

Serial Port I/O port address is 3F8h and the interrupt address is IRQ3, 4, 5, 6, 7, 9, 10, 11,

12

Î

IO=2F8h;

IRQ=3, 4, 5, 6, 7,

9, 10, 11, 12

Serial Port I/O port address is 2F8h and the interrupt address is IRQ3, 4, 5, 6, 7, 9, 10, 11,

12

Î

IO=3E8h;

IRQ=3, 4, 5, 6, 7,

9, 10, 11, 12

Serial Port I/O port address is 3E8h and the interrupt address is IRQ3, 4, 5, 6, 7, 9, 10, 11,

12

Î

IO=2E8h;

IRQ=3, 4, 5, 6, 7,

9, 10, 11, 12

Serial Port I/O port address is 2E8h and the interrupt address is IRQ3, 4, 5, 6, 7, 9, 10, 11,

12

Î Device Mode [RS232]

Use the Device Mode option to set the Serial Port 1 signaling mode.

Page 53

POC-W24C-ULT3 FHD Medical Panel PC

Î

RS422

Î

RS232 D EFAULT

Î

RS485

Configure Serial Port 1 as RS-422

Configure Serial Port 1 as RS-232

Configure Serial Port 1 as RS-485

4.3.3.1.2 Serial Port 2 Configuration

Î Serial Port [Enabled]

Use the Serial Port option to enable or disable the serial port.

Î

Disabled

Î

Enabled D EFAULT

Disable the serial port

Enable the serial port

Î Change Settings [Auto]

Use the Change Settings option to change the serial port IO port address and interrupt address.

Î

Auto D EFAULT

The serial port IO port address and interrupt address are automatically detected.

Î

IO=2F8h; IRQ=3 Serial Port I/O port address is 2F8h and the interrupt address is IRQ3

Î

IO=3F8h;

IRQ=3, 4, 5, 6, 7,

9, 10, 11, 12

Serial Port I/O port address is 3F8h and the interrupt address is IRQ3, 4, 5, 6, 7, 9, 10, 11,

12

Î

IO=2F8h;

IRQ=3, 4, 5, 6, 7,

9, 10, 11, 12

Serial Port I/O port address is 2F8h and the interrupt address is IRQ3, 4, 5, 6, 7, 9, 10, 11,

12

Î

IO=3E8h;

IRQ=3, 4, 5, 6, 7,

9, 10, 11, 12

Serial Port I/O port address is 3E8h and the interrupt address is IRQ3, 4, 5, 6, 7, 9, 10, 11,

12

Î

IO=2E8h;

IRQ=3, 4, 5, 6, 7,

9, 10, 11, 12

Serial Port I/O port address is 2E8h and the interrupt address is IRQ3, 4, 5, 6, 7, 9, 10, 11,

12

Page 54