- Computers & electronics
- Computer components
- System components
- Motherboards
- IEI Integration
- POC-W24C-ULT3
- User manual
4.3.9 USB Configuration. IEI Technology POC-W24C-ULT3 160 Pages
4.3.9 USB Configuration. IEI Technology POC-W24C-ULT3
advertisement
POC-W24C-ULT3 FHD Medical Panel PC
4.3.9 USB Configuration
Use the USB Configuration menu (
BIOS Menu 14 ) to read USB configuration
information and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Advanced
USB Configuration
USB Controllers:
1 XHCI
USB Devices:
1 Keyboard, 1 Mouse, 1 Point, 2 Hubs
Legacy USB Support [Enabled]
Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications.
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 14: USB Configuration
Î USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system
Î Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard can control the system even when there is no USB driver loaded onto the system.
Page 65
advertisement
Related manuals
advertisement
Table of contents
- 16 1 INTRODUCTION
- 20 1.4.1 Backlit Touch Buttons
- 28 2 UNPACKING
- 34 3 INSTALLATION
- 40 3.5.1 Using VoIP Handset
- 44 3.6.1 Barcode Reader Installation
- 46 3.6.2 Reading Light
- 52 3.10.1 AT Power Mode
- 52 3.10.2 ATX Power Mode
- 53 3.11.1 Wall Mounting
- 56 3.11.2 Arm Mounting
- 58 3.11.3 Stand Mounting
- 60 4 BIOS SETUP
- 61 4.1.1 Starting Setup
- 61 4.1.2 Using Setup
- 62 4.1.3 Getting Help
- 62 4.1.4 BIOS Menu Bar
- 65 4.3.1 Trusted Computing
- 66 4.3.2 ACPI Settings
- 67 4.3.3 F81866 Super IO Configuration
- 70 4.3.4 F81866 H/W Monitor
- 71 4.3.5 RTC Wake Settings
- 72 4.3.6 Serial Port Console Redirection
- 76 4.3.7 CPU Configuration
- 78 4.3.8 SATA Configuration
- 80 4.3.9 USB Configuration
- 81 4.3.10 IEI Feature
- 82 4.4.1 System Agent (SA) Configuration
- 86 4.4.2 PCH-IO Configuration
- 94 5 DRIVER INSTALLATION
- 107 5.11.1 SCR Driver
- 111 5.11.2 MSR Driver
- 114 5.11.3 Fingerprint Reader Driver
- 118 6 SYSTEM MAINTENANCE
- 125 7 INTERFACE CONNECTORS
- 128 7.2.1 Audio Connector (AUDIO_OUT1)
- 128 7.2.2 Audio Out Connector (AMP_OUT1)
- 128 7.2.3 Battery Connector (BAT1)
- 129 7.2.4 Debug Connector (DBG_PORT1)
- 129 7.2.5 Inverter Connector (INVERTER1)
- 129 7.2.6 LVDS Connector (LVDS1)
- 130 7.2.7 MCU Connector (HOTKEY_CN1)
- 131 7.2.8 MCU Flash Connector (JP8)
- 131 7.2.9 MCU Flash SPI ROM Connector (MCU_SPI1)
- 131 7.2.10 Microphone Connector (DMIC1)
- 132 7.2.11 Power Button Connector (PWR_BTN1)
- 132 7.2.12 Power LED Connector (PW_LED1)
- 132 7.2.13 RS-232 Serial Port Connector (COM2)
- 133 7.2.14 SATA Connectors (SATA1 & SATA2)
- 133 7.2.15 SPI Flash Connector (JSPI1)
- 133 7.2.16 TPM Connector (TPM1)
- 134 7.2.17 USB Connector (BT_USB1)
- 134 7.2.18 USB Connector (CAM_USB1)
- 135 7.2.19 USB Connector (RFID_USB1)
- 135 7.2.20 USB Connector (TOUCH_USB1)
- 136 7.3.1 GbE Connectors (LAN1 & LAN2)
- 136 7.3.2 HDMI Output Connector (HDMI_OUT1)
- 137 7.3.3 Power Connector (PWR1)
- 137 7.3.4 RS-232/422/485 DB-9 Serial Port (COM1)
- 137 7.3.5 USB 2.0 Connectors (USB20_CN1)
- 138 7.3.6 USB 3.0 Connectors (USB_CON1)
- 138 7.3.7 USB 3.0 Connectors (USB_CON2)
- 139 7.4.1 Flash Descriptor Security Override Jumper (ME_FLASH1)
- 139 7.4.2 LVDS Panel Voltage Selection Jumper (J_VLVDS1)
- 140 7.4.3 LVDS Panel Resolution Selection Jumper (SW1)
- 140 7.4.4 PCIe Mini/mSATA Mode Selection (MSATA_CN1)
- 141 A REGULATORY COMPLIANCE
- 146 B SAFETY PRECAUTIONS
- 147 B.1.1 General Safety Precautions
- 148 B.1.2 Anti-static Precautions
- 149 B.1.3 Product Disposal
- 150 B.1.4 Classification
- 151 B.2.1 Maintenance and Cleaning
- 151 B.2.2 Cleaning Tools
- 152 C BIOS MENU OPTIONS
- 155 D WATCHDOG TIMER
- 158 E HAZARDOUS MATERIALS DISCLOSURE