- Computers & electronics
- Computer components
- System components
- Motherboards
- IEI Integration
- POC-W24C-ULT3
- User manual
4.4.1 System Agent (SA) Configuration. IEI Technology POC-W24C-ULT3 160 Pages
4.4.1 System Agent (SA) Configuration. IEI Technology POC-W24C-ULT3
advertisement
POC-W24C-ULT3 FHD Medical Panel PC
4.4 Chipset
Use the Chipset menu (
) to configure the system chipset.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
> System Agent (SA) Configuration
> PCH-IO Configuration
System Agent (SA)
Parameters
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 16: Chipset
4.4.1 System Agent (SA) Configuration
Use the System Agent (SA) Configuration menu (
BIOS Menu 17 ) to configure the
System Agent (SA) parameters.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
VT-d
> Graphics Configuration
> Memory Configuration
[Disabled] VT-d capability
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 17: System Agent (SA) Configuration
Page 67
POC-W24C-ULT3 FHD Medical Panel PC
Î VT-d [Disabled]
Use the VT-d option to enable or disable VT-d support.
Î
Disabled D EFAULT
Disable VT-d support.
Î
Enabled
Enable VT-d support.
4.4.1.1 Graphics Configuration
Use the Graphics Configuration menu (
BIOS Menu 18 ) to configure the graphics settings.
Graphics Configuration
Primary Display
Internal Graphics
DVMT Pre-Allocated
DVMT Total Gfx Mem
> LCD Control
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
[Auto]
[Enabled]
[256M]
[MAX]
Select which of IGFX/PCIE
Graphics device should be
Primary Display.
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 18: Graphics Configuration
Î Primary Display [Auto]
Use the Primary Display option to select the graphics controller used as the primary boot device. Configuration options are listed below:
Auto
IGFX
PCIE
D EFAULT
Page 68
POC-W24C-ULT3 FHD Medical Panel PC
Î Internal Graphics [Enabled]
Use the Internal Graphics option to enable or disable the internal graphics device.
Î
Auto
The internal graphics device is automatically detected and enabled.
Î
Disabled
Î
Disable the internal graphics device.
Enabled D EFAULT
Enable the internal graphics device. The following options/submenu appear with values that can be selected:
Total Mem
Î DVMT Pre-Allocated [256M]
Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the integrated graphics processor when the system boots. The system memory allocated can then only be used as graphics memory, and is no longer available to applications or the operating system. Configuration options are listed below:
32M
64M
128M
256M
512M
D EFAULT
Î DVMT Total Gfx Mem [MAX]
Use the DVMT Total Gfx Mem option to select DVMT5.0 total graphic memory size used by the internal graphic device. The following options are available:
128M
256M
MAX D EFAULT
Page 69
POC-W24C-ULT3 FHD Medical Panel PC
4.4.1.1.1 LCD Control
Use the LCD Control submenu (
BIOS Menu 19 ) to select a display device which will be
activated during POST.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display [VBIOS Default]
Select the Video Device which will be activated during POST. This has no effect if external graphics present.
Secondary boot display selection will appear based on your selection.
VGA modes will be supported only on primary display.
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 19: LCD Control
Î Primary IGFX Boot Display [VBIOS Default]
Use the Primary IGFX Boot Display option to select the display device used by the system when it boots.
VBIOS
HDMI
LVDS
D EFAULT
Page 70
advertisement
Related manuals
advertisement
Table of contents
- 16 1 INTRODUCTION
- 20 1.4.1 Backlit Touch Buttons
- 28 2 UNPACKING
- 34 3 INSTALLATION
- 40 3.5.1 Using VoIP Handset
- 44 3.6.1 Barcode Reader Installation
- 46 3.6.2 Reading Light
- 52 3.10.1 AT Power Mode
- 52 3.10.2 ATX Power Mode
- 53 3.11.1 Wall Mounting
- 56 3.11.2 Arm Mounting
- 58 3.11.3 Stand Mounting
- 60 4 BIOS SETUP
- 61 4.1.1 Starting Setup
- 61 4.1.2 Using Setup
- 62 4.1.3 Getting Help
- 62 4.1.4 BIOS Menu Bar
- 65 4.3.1 Trusted Computing
- 66 4.3.2 ACPI Settings
- 67 4.3.3 F81866 Super IO Configuration
- 70 4.3.4 F81866 H/W Monitor
- 71 4.3.5 RTC Wake Settings
- 72 4.3.6 Serial Port Console Redirection
- 76 4.3.7 CPU Configuration
- 78 4.3.8 SATA Configuration
- 80 4.3.9 USB Configuration
- 81 4.3.10 IEI Feature
- 82 4.4.1 System Agent (SA) Configuration
- 86 4.4.2 PCH-IO Configuration
- 94 5 DRIVER INSTALLATION
- 107 5.11.1 SCR Driver
- 111 5.11.2 MSR Driver
- 114 5.11.3 Fingerprint Reader Driver
- 118 6 SYSTEM MAINTENANCE
- 125 7 INTERFACE CONNECTORS
- 128 7.2.1 Audio Connector (AUDIO_OUT1)
- 128 7.2.2 Audio Out Connector (AMP_OUT1)
- 128 7.2.3 Battery Connector (BAT1)
- 129 7.2.4 Debug Connector (DBG_PORT1)
- 129 7.2.5 Inverter Connector (INVERTER1)
- 129 7.2.6 LVDS Connector (LVDS1)
- 130 7.2.7 MCU Connector (HOTKEY_CN1)
- 131 7.2.8 MCU Flash Connector (JP8)
- 131 7.2.9 MCU Flash SPI ROM Connector (MCU_SPI1)
- 131 7.2.10 Microphone Connector (DMIC1)
- 132 7.2.11 Power Button Connector (PWR_BTN1)
- 132 7.2.12 Power LED Connector (PW_LED1)
- 132 7.2.13 RS-232 Serial Port Connector (COM2)
- 133 7.2.14 SATA Connectors (SATA1 & SATA2)
- 133 7.2.15 SPI Flash Connector (JSPI1)
- 133 7.2.16 TPM Connector (TPM1)
- 134 7.2.17 USB Connector (BT_USB1)
- 134 7.2.18 USB Connector (CAM_USB1)
- 135 7.2.19 USB Connector (RFID_USB1)
- 135 7.2.20 USB Connector (TOUCH_USB1)
- 136 7.3.1 GbE Connectors (LAN1 & LAN2)
- 136 7.3.2 HDMI Output Connector (HDMI_OUT1)
- 137 7.3.3 Power Connector (PWR1)
- 137 7.3.4 RS-232/422/485 DB-9 Serial Port (COM1)
- 137 7.3.5 USB 2.0 Connectors (USB20_CN1)
- 138 7.3.6 USB 3.0 Connectors (USB_CON1)
- 138 7.3.7 USB 3.0 Connectors (USB_CON2)
- 139 7.4.1 Flash Descriptor Security Override Jumper (ME_FLASH1)
- 139 7.4.2 LVDS Panel Voltage Selection Jumper (J_VLVDS1)
- 140 7.4.3 LVDS Panel Resolution Selection Jumper (SW1)
- 140 7.4.4 PCIe Mini/mSATA Mode Selection (MSATA_CN1)
- 141 A REGULATORY COMPLIANCE
- 146 B SAFETY PRECAUTIONS
- 147 B.1.1 General Safety Precautions
- 148 B.1.2 Anti-static Precautions
- 149 B.1.3 Product Disposal
- 150 B.1.4 Classification
- 151 B.2.1 Maintenance and Cleaning
- 151 B.2.2 Cleaning Tools
- 152 C BIOS MENU OPTIONS
- 155 D WATCHDOG TIMER
- 158 E HAZARDOUS MATERIALS DISCLOSURE