4.4.2 PCH-IO Configuration. IEI Technology POC-W24C-ULT3 160 Pages
4.4.2 PCH-IO Configuration. IEI Technology POC-W24C-ULT3
advertisement
POC-W24C-ULT3 FHD Medical Panel PC
4.4.1.2 Memory Configuration
Use the Memory Configuration submenu (
BIOS Menu 20 ) to display the memory
information.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
Memory Information
Total Memory
DIMM1
DIMM2
4096 MB
Not Present
4096 MB
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 20: Memory Configuration
4.4.2 PCH-IO Configuration
Use the PCH-IO Configuration menu (
) to configure the PCH-IO chipset.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
Auto Power Button Status
> PCI Express Configuration
> HD Audio Configuration
[Disable (ATX)] Select AC power state when power is re-applied after a power failure.
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 21: PCH-IO Configuration
Page 71
POC-W24C-ULT3 FHD Medical Panel PC
4.4.2.1 PCI Express Configuration
Use the PCI Express Configuration
) to configure the PCI
Express slots.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
PCI Express Configuration
> M_PCIE1
> M2_CN1
M_PCIE1 Settings.
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 22: PCI Express Configuration
The M_PCIE1 and M2_CN1 submenus both contain the following options:
Î PCIe Speed [Auto]
Use the PCIe Speed option to configure the PCIe interface speed.
Auto
Gen
Gen
Gen
D EFAULT
Î Detect Non-Compliance Device [Disabled]
Use the Detect Non-Compliance Device option to enable or disable detecting if a non-compliance PCI Express device is connected to the PCI Express slot.
Page 72
POC-W24C-ULT3 FHD Medical Panel PC
Î
Disabled D EFAULT
Disables to detect if a non-compliance PCI
Express device is connected to the PCI Express slot.
Î
Enabled Enables to detect if a non-compliance PCI Express device is connected to the PCI Express slot.
4.4.2.2 HD Audio Configuration
Use the HD Audio Configuration
) to configure the High
Definition Audio codec.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
HD Audio Configuration
HD Audio [Enabled]
Control Detection of the
HD-Audio device.
Disable = HDA will be unconditionally disabled
Enabled = HDA will be unconditionally enabled.
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 23: HD Audio Configuration
Î HD Audio [Enabled]
Use the HD Audio BIOS option to enable or disable the High Definition Audio controller.
Î
Disabled
Î
The High Definition Audio controller is disabled.
Enabled D EFAULT
The High Definition Audio controller is enabled.
Page 73
POC-W24C-ULT3 FHD Medical Panel PC
4.5 Security
Use the Security menu (
BIOS Menu 24 ) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Password Description
If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup.
If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights.
The password must be
In the following range:
Maximum length
Minimum length
Administrator Password
3
20
Set Administrator
Password
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
User Password
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 24: Security
Î Administrator Password
Use the Administrator Password field to set or change an administrator password.
Î User Password
Use the User Password field to set or change a user password.
Page 74
POC-W24C-ULT3 FHD Medical Panel PC
4.6 Boot
Use the Boot menu (
BIOS Menu 25 ) to configure system boot options.
Boot Configuration
Bootup NumLock State
Quiet Boot
UEFI Boot
Launch PXE OpROM
Option ROM Messages
Boot Option Priorities
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
[On]
[Enabled]
[Disabled]
[Disabled]
[Force BIOS]
Select the keyboard
NumLock state
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 25: Boot
Î Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must be modified during boot up.
Î
On D EFAULT
Allows the Number Lock on the keyboard to be enabled automatically when the computer system boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of the keyboard. To confirm this, the Number Lock LED light on the keyboard is lit.
Î
Off Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.
Page 75
POC-W24C-ULT3 FHD Medical Panel PC
Î Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.
Î
Disabled
Î
Enabled D EFAULT
Normal POST messages displayed
OEM Logo displayed instead of POST messages
Î UEFI Boot [Disabled]
Use the UEFI Boot BIOS option to enable or disable UEFI boot.
Î
Disabled D EFAULT
Î
Enabled
Disable UEFI boot.
Enable UEFI boot if the 1 st
boot device is a GPT
HDD.
Î Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices.
Î
Disabled D EFAULT
Î
Enabled
Ignore all PXE Option ROMs
Load PXE Option ROMs
Î Option ROM Messages [Force BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.
Î
Force
BIOS
Î
Keep
Current
D
EFAULT
Sets display mode to force BIOS.
Sets display mode to current.
Page 76
POC-W24C-ULT3 FHD Medical Panel PC
4.7 Save & Exit
Use the Save & Exit menu (
BIOS Menu 26 ) to load default BIOS values, optimal failsafe
values and to save configuration changes.
Restore Defaults
Save as User Defaults
Restore User Defaults
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Save Changes and Reset
Discard Changes and Reset
Reset the system after saving the changes.
---------------------
ÆÅ
: Select Screen
↑ ↓
: Select Item
Enter: Select
+/-: Change Opt.
F4: Save & Exit
ESC: Exit
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 26: Save & Exit
Î Save Changes and Reset
Use the Save Changes and Reset option to save the changes made to the BIOS options and reset the system.
Î Discard Changes and Reset
Use the Discard Changes and Reset option to exit the system without saving the changes made to the BIOS configuration setup program.
Î Restore Defaults
Use the Restore Defaults option to load the optimal default values for each of the parameters on the Setup menus. F3 key can be used for this operation.
Page 77
POC-W24C-ULT3 FHD Medical Panel PC
Î Save as User Defaults
Use the Save as User Defaults option to save the changes done so far as user defaults.
Î Restore User Defaults
Use the Restore User Defaults option to restore the user defaults to all the setup options.
Page 78
advertisement
