5 DRIVER INSTALLATION. IEI Technology POC-W24C-ULT3

POC-W24C-ULT3 FHD Medical Panel PC

Chapter

5

5

Driver Installation

Page 79

5.1 Available Software Drivers

POC-W24C-ULT3 FHD Medical Panel PC

NOTE:

The contents of the driver folder may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates.

All the drivers for the POC-W24C-ULT3 are on the utility CD that came with the system.

To install the drivers, please follow the steps below.

Step 1: Insert the CD into a CD drive connected to the system.

Step 2:

The driver main menu with a list of available drivers appears ( Figure 5-1 ).

Figure 5-1: Available Drivers

Step 3: Install all of the necessary drivers in this menu.

Step 0:

Page 80

POC-W24C-ULT3 FHD Medical Panel PC

5.2 Intel® Chipset Driver

To install the chipset driver, please follow the steps below.

Step 1: Select Chipset from the list of the driver CD.

Step 2: Double click the setup file in the folder. The Intel® Chipset Device Software installation wizard appears.

Figure 5-2: Intel® Chipset Device Software Installation Wizard

Step 3: Follow the step-by-step instruction of the installation wizard to install the driver.

Step 0:

Page 81

POC-W24C-ULT3 FHD Medical Panel PC

5.3 Intel® Graphics Driver

To install the graphics driver, please follow the steps below.

Step 1: Select VGA from the list of the driver CD. Locate the driver setup file for the corresponding operating system.

Step 2: Double click the setup file in the folder. The Intel® Graphics Driver installation wizard appears (

Figure 5-3 ).

Figure 5-3: Intel® Graphics Driver Installation Wizard

Step 3: Follow the step-by-step instruction of the installation wizard to install the graphics driver.

Step 0:

Page 82

POC-W24C-ULT3 FHD Medical Panel PC

5.4 Audio Driver

To install the driver for the speaker and the microphone, please follow the steps below.

Step 1: Select Audio from the list of the driver CD.

Step 2: Double click the setup file in the folder. The InstallShield Wizard screen appears ( Figure 5-4 ).

Figure 5-4: Realtek HD Audio Driver InstallShield Wizard

Step 3: Follow the step-by-step instruction of the installation wizard to install the HD

Audio driver.

Step 0:

Page 83

POC-W24C-ULT3 FHD Medical Panel PC

5.5 LAN Driver

To install the LAN driver, please follow the steps below.

Step 1: Select LAN from the list of the driver CD. Locate the driver setup file for the corresponding operating system.

Step 2: Double click the setup file in the folder. The Install Wizard screen appears

( Figure 5-4 ).

Figure 5-5: LAN Driver Installation Wizard

Step 3: Follow the step-by-step instruction of the installation wizard to install the Intel®

Network Connection driver.

Step 0:

Page 84

POC-W24C-ULT3 FHD Medical Panel PC

5.6 Intel® Management Engine

To install the Intel® Management Engine Components, please follow the steps below.

Step 1: Select ME from the list of the driver CD. Locate the driver setup file.

Step 2: Double click the setup file. The installation wizard window appears (

Figure 5-3 ).

Figure 5-6: Intel® ME Components Installation Wizard

Step 3: Follow the step-by-step instruction of the installation wizard to install the Intel®

Management Engine Components.

Step 0:

Page 85

POC-W24C-ULT3 FHD Medical Panel PC

5.7 Wireless LAN Driver

To install the wireless LAN driver, please follow the steps below.

Step 1: Select WIFI from the list of the driver CD. Locate the setup file from the WLAN folder.

Step 2: Double click the setup file in the folder, and then select the language for the installation. The InstallShield Wizard screen appears (

Figure 5-7

).

Figure 5-7: Wireless LAN InstallShield Wizard

Step 3: Follow the step-by-step instruction of the installation wizard to install the

Wireless LAN driver.

Step 0:

Page 86

POC-W24C-ULT3 FHD Medical Panel PC

5.8 Bluetooth Driver

To install the Bluetooth driver, please follow the steps below.

Step 1: Select WIFI from the list of the driver CD. Locate the setup file from the BT folder.

Step 2: Double click the setup file in the folder. The InstallShield Wizard screen appears

(

Figure 5-8

).

Figure 5-8: Bluetooth Driver InstallShield Wizard

Step 3: Follow the step-by-step instruction of the installation wizard to install the

Bluetooth driver.

Step 0:

Page 87

POC-W24C-ULT3 FHD Medical Panel PC

5.9 Keypad AP

The Keypad AP is an OSD control tool developed by IEI. To install the Keypad AP, please follow the steps below.

Step 1: Select Keypad AP from the list of the driver CD.

Step 2: Double click the setup file in the folder, and then select Yes from the dialog box.

The Setup Wizard screen appears ( Figure 5-9

).

Figure 5-9: Keypad AP Setup Wizard

Step 3: Follow the step-by-step instruction of the installation wizard to install the Keypad AP.

Step 4: After the installation, the Keypad AP can be accessed by pressing the brightness up/down buttons or the volume up/down buttons on the bottom frame of the monitor. It allows users to control screen brightness and audio volume.

Figure 5-10: Keypad AP

Page 88

POC-W24C-ULT3 FHD Medical Panel PC

5.10 RFID Driver (Optional)

To install the RFID driver, please follow the steps below.

Step 1: Open the Device Manager window. Long press or right click USB <-> Serial .

Select Update Driver Software from the pop-up window.

Figure 5-11: Device Manager - Update Driver Software

Step 2: The Update Driver Software window appears. Select Browse my computer for driver software .

Page 89

POC-W24C-ULT3 FHD Medical Panel PC

Figure 5-12: Update Driver Software Window

Step 3: The following window appears. Press/Click the Browse button to specify the

RFID driver directory (\Docs\12.Other\ POCP-MF-RFID-R10\RFID\D490). Then, press/click the Next button.

Figure 5-13: Browse for Driver Software Window

Step 4: The system starts installing the RFID driver.

Step 5: After the driver installation process is complete, a confirmation screen appears.

Click Close to exit the program.

Page 90

POC-W24C-ULT3 FHD Medical Panel PC

Figure 5-14: Driver Installation Complete Window

Step 6: Repeat Step 1 ~ Step 5 to install the RFID driver again.

Step 7: The Device Manager Window now shows the installed RFID devices.

Step 0:

Figure 5-15: Device Manager Window – RFID Devices

Page 91