B.1.2 Anti-static Precautions. IEI Technology POC-W24C-ULT3

POC-W24C-ULT3 FHD Medical Panel PC

ƒ Electric shocks can occur if the POC-W24C-ULT3 chassis is opened when the POC-W24C-ULT3 is running. To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth.

ƒ Do not drop or insert any objects into the ventilation openings of the

POC-W24C-ULT3.

ƒ If considerable amounts of dust, water, or fluids enter the

POC-W24C-ULT3 , turn off the power supply immediately, unplug the power cord, and contact the POC-W24C-ULT3 vendor.

ƒ DO NOT : o Drop the POC-W24C-ULT3 against a hard surface. o Strike or exert excessive force onto the LCD panel. o Touch any of the LCD panels with a sharp object o In a site where the ambient temperature exceeds the rated temperature

B.1.2 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

POC-W24C-ULT3 may result in permanent damage to the

POC-W24C-ULT3 and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components, including the POC-W24C-ULT3. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the POC-W24C-ULT3 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

ƒ Wear an anti-static wristband : Wearing a simple anti-static wristband can help to prevent ESD from damaging any electrical component.

ƒ Self-grounding : Before handling any electrical component, touch any grounded conducting material. During the time the electrical component is handled, frequently touch any conducting materials that are connected to the ground.

Page 133