Pushing the wine conditioning unit into the niche. Miele Appliances 10028650

Add to My manuals
80 Pages

advertisement

Pushing the wine conditioning unit into the niche. Miele Appliances 10028650 | Manualzz

Installing the wine conditioning unit

 Now tighten the screws.

 You can now push the wine conditioning unit into the niche.

Pushing the wine conditioning unit into the niche

Make sure that the power cord does not become trapped or damaged as you push the wine conditioning unit into its installation space.

To avoid damage to the flooring which is susceptible to scratching, take great care when pushing the appliance into the niche.

Securing the wine conditioning unit in the niche

 The wine conditioning unit must protrude evenly from the furniture doors by 1/16" (2 mm).

 Open the appliance door.

 Push the appliance into the niche until the front of the appliance door is flush with surrounding furniture doors.

 Pull the wine conditioning unit forward so that it stands proud of the furniture doors evenly by

1/16" (2 mm).

 Remove cover   and first screw the wine conditioning unit to the adjacent furniture unit at the top left   .

The wine conditioning unit will align itself to the left side of the niche. The front of the appliance door must be flush with the furniture front.

 Put cover   back into place.

75

Installing the wine conditioning unit

When the wine conditioning unit is connected to the power supply, the power connection symbol   will appear in the display after a short while.

 Screw the wine conditioning unit at the bottom right and left to adjacent furniture units.

 If necessary, a fourth screw can be used in the top right-hand hinge to secure the wine conditioning unit.

To do so, dismantle the door and then fit this extra screw.

 Close the appliance door and check that the side edges of the appliance door are aligned with the side walls of the wine conditioning unit.

 Now connect the wine conditioning unit to the power supply.

 Touch the On/Off sensor.

The power connection symbol   will go out and the wine conditioning unit will start to cool.

The Push2open system on the wine conditioning unit is now activated (see

"Guide to the appliance – Door opening aid").

76

advertisement

Related manuals

advertisement

Table of contents