Spray. Graco 333208D, Electric High Pressure Airless Sprayer

Add to my manuals
26 Pages

advertisement

Spray. Graco 333208D, Electric High Pressure Airless Sprayer | Manualzz

Spray

Spray

6.

Disengage gun trigger lock.

NOTICE

Do not allow pump to run dry. It will quickly accelerate to a high speed causing damage.

1.

Perform Prime procedure, page 11.

2.

Perform Pressure Relief Procedure, page 10.

3.

Install tip and tip guard onto gun.

4. Turn power switch (E) ON.

ti5048b

7.

Spray a test pattern. Read fluid manufacturer’s recommendations. Adjust as necessary.

21

E WLE

5.

Pull out and turn pressure adjustment knob (H) until desired pressure is reached. Turn clockwise to increase pressure, counterclockwise to decrease pressure. Push knob in to lock.

H

+

_

8.

Flush when finished spraying. See Prime/Flush,

page 11.

9.

Perform Pressure Relief Procedure, page 10.

Shutdown

NOTICE

Never leave water or water-based fluid in pump over night. If water-base fluid has been used, flush with water first, then with a rust inhibitor (such as mineral spirits). Relieve pressure, but leave rust inhibitor in pump to protect parts from corrosion.

ti20171a_1

To shutdown, perform Prime/Flush procedure, page 11.

Perform Pressure Relief Procedure, page 10.

12 333208D

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals