Advanced Display Module. Graco 332562F, ProMix® PD2K Electronic Proportioner

Add to my manuals
96 Pages

advertisement

Advanced Display Module. Graco 332562F, ProMix® PD2K Electronic Proportioner | Manualzz

Advanced Display Module

The ADM display shows graphical and text information related to setup and spray operations.

For detail on the display and individual screens, see

Run Mode Screens, page 32

, or

Setup Mode Screens, page 39

Keys are used to input numerical data, enter setup screens, navigate within a screen, scroll through screens, and select setup values.

To prevent damage to the softkey buttons, do not press the buttons with sharp objects such as pens, plastic cards, or fingernails.

1

.

2 3

4 5 6

7 8 9

0 .

Figure 10 Advanced Display Module

Use the USB port on the ADM to download or upload data.

1.

Enable USB downloads.

See

Advanced Screen 3, page 69 .

2.

Remove the cover from the USB port on the bottom of the ADM. Insert the USB drive.

3.

During the download, USB BUSY appears on the screen.

4.

When the download is complete, USB IDLE appears on the screen. The USB drive may then be removed.

than 60 seconds, the message disappears. To determine if the USB is busy or idle, check the

Error Status bar on the screen. If idle, remove the USB.

5.

Insert the USB flash drive into the USB port of the computer.

6.

The USB flash drive window automatically opens.

If it does not, open the USB flash drive from within Windows® Explorer.

7.

Open Graco folder.

8.

Open system folder. If downloading data from more than one system, there will be more than one folder. Each folder is labeled with the corresponding serial number of the ADM. (The serial number is on the back of the ADM.)

9.

Open DOWNLOAD folder.

10. Open LOG FILES folder labeled with the highest number. The highest number indicates the most recent data download.

11. Open log file. Log files open in Microsoft®

Excel® by default if the program is installed.

They also can be opened in any text editor of

Microsoft® Word.

(UTF-16) format. If opening the log file in

Microsoft Word, select Unicode encoding.

12. Always reinstall the USB cover after removing the USB, to keep the drive free of dirt and dust.

332562F 17

Advanced Display Module

Use this procedure to install a system configuration file and/or a custom language file.

1.

USB Download folder structure on the USB flash drive.

2.

Insert the USB flash drive into the USB port of the computer.

3.

The USB flash drive window automatically opens.

If it does not, open the USB flash drive from within Windows Explorer.

4.

Open the Graco folder.

5.

Open the system folder. If working with more than one system, there will be more than one folder within the Graco folder. Each folder is labeled with the corresponding serial number of the ADM. (The serial number is on the back of the module.)

6.

If installing the system configuration settings file, place SETTINGS.TXT file into UPLOAD folder.

7.

If installing the custom language file, place

DISPTEXT.TXT file into UPLOAD folder.

8.

Remove the USB flash drive from the computer.

9.

Install the USB flash drive into the USB port of the ProMix PD2K system USB port.

10. During the upload, USB BUSY displays on the screen.

11. Remove the USB flash drive from the USB port.

users can now select the new language from the

Language drop-down menu in the Advanced Setup

Screen 1.

installed, it is recommended to remove this file from the UPLOAD folder on the USB flash drive. This will prevent inadvertently overwriting any future setup changes.

18 332562F

Advanced Display Module

To prevent damage to the softkey buttons, do not press the buttons with sharp objects such as pens, plastic cards, or fingernails.

Press to startup or shutdown the pump/motor.

• Solid green indicates that power is applied to the motor.

• Solid yellow indicates that power to the motor is off.

• Blinking green or yellow indicates that the system is in Setup mode.

Press to immediately stop the system and remove motor power.

Press to select the specific screen or operation shown on the display directly next to each key. The top left soft key is the Edit key, which allows access to any settable fields on a screen.

Left/Right Arrows:

Use to move from screen to screen.

Up/Down Arrows:

Use to move among fields on a screen, items on a dropdown menu, or multiple screens within a function.

Numeric Keypad Use to input values. See

ADM Display, page 17 .

Use to cancel a data entry field.

Press to enter or exit Setup mode.

Press to choose a field to update, to make a selection, to save a selection or value, to enter a screen, or to acknowledge an event.

332562F 19

Advanced Display Module

The following icons appear in the ADM display, directly to the left or right of the soft key which activates that operation.

To prevent damage to the softkey buttons, do not press the buttons with sharp objects such as pens, plastic cards, or fingernails.

Purge

Press to start a gun purge procedure.

Enter Screen

Press to enter screen for editing. Highlights editable data on a screen.

Use Up/Down arrows to move between data fields on the screen.

Press to exit screen after editing.

Exit Screen

Press to accept calibration value.

Accept

Press to cancel or reject calibration value.

Cancel

Press to start a pump priming procedure.

Prime Pump

Press to start a line fill procedure.

Line/Fill/Run

Pre-Fill Pump

Press to mark pump as filled.

(Only for applicable pumps.)

Press to start a spray procedure.

Mix

Standby Press to stop all pumps and put system in

Standby.

Stop

Press to start a pump pressure check.

Pressure Check

Press to start a pump volume check.

Volume Check

Press to log the material usage and increment the job number.

Job Complete

Press to reset the current usage counter.

Counter Reset

Appears on the User ID

Keyboard screen. Use to move cursor to the left.

Move Cursor to Left

Move Cursor to Right

Appears on the User ID

Keyboard screen. Use to move cursor to the right.

Appears on the User ID

Keyboard screen. Use to erase all characters.

Erase All

Backspace

Appears on the User ID

Keyboard screen. Use to erase one character at a time.

20 332562F

Advanced Display Module

Upper Case/Lower

Case

Appears on the User

ID Keyboard screen.

Use to change case

(upper/lower).

Press to get more information on active system error.

Info

Troubleshoot

Press to see troubleshooting information for system error.

Press to see QR Code for system error.

QR Code

As you move through the screens, you will notice that icons are used frequently to simplify global communication. The following descriptions explain what each icon represents.

User ID

Potlife

Recipe Number

Pressure

Job Number

Target Ratio

Flow Rate

Volume

Material A

Material A+B

Material B

There are two sets of screens:

• The Run screens control mixing operations and display system status and data.

• The Setup screens control system parameters and advanced features.

Press on any Run screen to enter the Setup screens. If the system has a password lock, the

Password screen displays. If the system is not locked

(password is set to 0000), System Screen 1 displays.

Press on any Setup screen to return to the

Home screen.

Press the Enter soft key function on any screen.

to activate the editing

Press the Exit soft key to exit any screen.

Use the other softkeys to select the function adjacent to them.

Calendar

Alarm/Advisory

Solvent

Time

Deviation

332562F 21

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents