User Preferences. Frigidaire 318205258

USER PREFERENCES

SETTING CONTINUOUS BAKE OR 12

HOUR ENERGY SAVING

The

TIMER

pad controls the Continuous Bake or 12 Hour

Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 12 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for Continuous Bake or 12 Hour

Energy Saving features

1. Press and hold

TIMER

for 6 seconds.

After 6 seconds

"

12hr

"

or

"

--h

"

will appear in the display and the control will beep once.

2. Press or pad to switch between the 6 Hour

Energy Saving and continuous bake features.

Note:

"

12hr

"

in the display indicates the control is set for the 12 Hour Energy Saving mode and

"

- -h

"

indicates the control is set for the Continuous Bake feature.

3. Wait 4 seconds to accept the change (display will return to time of day) or press

CANCEL

pad to reject the change.

SETTING TEMPERATURE DISPLAY —

FAHRENHEIT OR CELSIUS:

The

BROIL

pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or

Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or

Celsius to Fahrenheit

1. Press pad and

hold

for 6 seconds. A beep will sound,

"

---

"

will appear and

"

BROIL

"

will fl ash in the display. After 6 seconds a beep will be heard and

"

F

"

or

"

C

"

will appear in the display. If

"

F

" appears, the display is set to show temperatures in

Fahrenheit. If

"

C

"

appears, the display is set to show temperatures in Celsius.

2. Press or pad to switch between Fahrenheit or

Celsius display modes. The display will show either

"

F

"

or

"

C

"

.

3. Wait 4 seconds to accept the change or press

CANCEL

pad to reject the change.

SETTING THE CLOCK

The

SET CLOCK

pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation.

The clock has been preset at the factory for the 12 hour operation. When the range is fi rst plugged in, or when the power supply to the range has been interrupted, the timer in the display will fl ash.

To set the clock

(example below for 1:30)

1. Press .

"

CLO

"

will appear in the display.

2. Press or pad to set the correct time of day.

Wait 5 seconds to accept the change or press the

CANCEL

pad to reject the change. The new time of day will appear in the display.

CHANGING BETWEEN 12 OR 24 HOUR

TIME OF DAY DISPLAY

1. Press and hold

SET CLOCK

for 6 seconds.

"

CLO

"

will appear in the display.

2.

CONTINUE

holding the pad until

"

12h

"

or

"

24h

" appears in the display and the control beeps once.

3. Press or pad to switch between the 12 and 24 hour time of day display. The display will show either

"

12h

"

or

"

24h

"

.

4. Wait 5 seconds to accept the change or press

CANCEL

pad to reject the change.

5. Reset the correct time as described in

To set the

Clock

above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours.

18