Screed Burner. Graco 3A1320K, ThermoLazer 200/200TC/300TC and Thermolazer ProMelt Pavement Marking Systems, Repair, 3A1320H, ThermoLazer 200/200TC/300TC and Thermolazer ProMelt Pavement Marking Systems, Repair, ThermoLazer 300TC, ThermoLazer 200TC, 3A1320J, ThermoLazer 200/200TC/300TC and Thermolazer ProMelt Pavement Marking Systems, Repair, 3A1320L, ThermoLazer 200/200TC/300TC and Thermolazer ProMelt Pavement Marking Systems, Repair

Add to My manuals
48 Pages

advertisement

Screed Burner. Graco 3A1320K, ThermoLazer 200/200TC/300TC and Thermolazer ProMelt Pavement Marking Systems, Repair, 3A1320H, ThermoLazer 200/200TC/300TC and Thermolazer ProMelt Pavement Marking Systems, Repair, ThermoLazer 300TC, ThermoLazer 200TC, 3A1320J, ThermoLazer 200/200TC/300TC and Thermolazer ProMelt Pavement Marking Systems, Repair, 3A1320L, ThermoLazer 200/200TC/300TC and Thermolazer ProMelt Pavement Marking Systems, Repair | Manualzz

Screed Burner

Screed Burner

Horizontal screed burner(s)

Removal

1. Remove screed burner flame indicator (67).

Installation

1. Apply high-temperature thread sealant to 3/8-16 threads of orifice (60) and screw into burner (2).

NOTE: The orifice end with the smallest hole should be screwed into the screed burner.

67 ti17075b

2. Unscrew screed burner and orifice from gas manifold.

60

2 ti17077b

2. Apply pipe sealant to 1/8 in. NPT thread of orifice fitting (60) and screw on adapter fitting (363).

ti17076b

60 ti21950a

3. Unscrew adapter fitting (363) from orifice fitting (60).

363

3. Apply pipe sealant to 1/8 in. NPT thread of adapter fitting (363) and screw into gas manifold.

60 ti21950a

363

4. Unscrew orifice fitting (60) from screed burner (2).

363 ti17076b

4. Install screed burner flame indicator (67).

60

2 ti17077b

67 ti17075b

3A1320K 33

advertisement

Related manuals