Company Statements. BALZER FIELD FLOATER 6 108 Pages
advertisement
COMPANY STATEMENTS
Accuracy
Balzer Incorporated is dedicated to providing the most reliable and durable agricultural related products available We have made every attempt to provide the most accurate and readily understandable information on our equipment Due to our continuing efforts to produce the best products available, updates and improvements to our equipment may precede updates to this and other manuals Therefore, the contents of this manual are based on the information in effect at the time of publication and are subject to change without notice
It is the policy of Balzer Incorporated to constantly improve its products whenever it is practical to do so Therefore, Balzer
Incorporated reserves the right to redesign or change its equipment or component parts thereof without incurring the obligation to install or furnish such changes on equipment manufactured prior to date of redesign or change
To the Purchaser
This is the safety alert symbol It is used to alert the operator to an instruction concerning the personal safety and risk factor of this equipment Always observe and heed these very important instructions to promote a safe operation with good preventive maintenance habits
This Balzer product is designed and manufactured to provide years of dependable service when used for the purpose for which it is intended, and when properly maintained
NEVER OPERATE THIS EQUIPMENT AT SPEEDS OVER 2O MPH
NEVER OPERATE THIS EQUIPMENT UNTIL USER FULLY UNDERSTANDS THE COMPLETE CONTENTS OF THIS
MANUAL FOR OWNERS WHO DO NOT OPERATE THIS EQUIPMENT, IT IS THE OWNER’S RESPONSIBILITY TO
ENSURE ALL USERS ARE PROPERLY INSTRUCTED AND FULLY AWARE OF THIS MANUAL’S CONTENTS
This is important in the safe handing of this equipment and promoting an efficient operation If there are any questions about areas in this manual, it is important to contact your dealer for clarification
This machine is warranted as stated below Registration of this equipment is to be completed online as soon as possible This will provide a ready reference to help you in securing warranty and in answering questions that you may have at some later date
Operating instructions and parts manuals are shipped with this machine If parts of these manuals are missing or become unreadable, contact your dealer for a replacement manual
The serial number and identification tag is located to the front of the frame Please refer to these numbers when parts or warranty communication is necessary
Warranty Manufacture
The Dealer or Distributor understands and agrees the Manufacturer extends only the following Warranty to customers In the event a Dealer or Distributor extends any additional warranty (such as by enlarging the scope or period of warranty or undertaking a warranty of merchantability or fitness for any particular purpose) or any other obligation whatsoever, the Dealer or Distributor shall: (1) be solely responsible therefore; (2) have no recourse against the Manufacturer thereof; and (3) defend, indemnify, and hold the Manufacturer harmless against any claim or cause of action whatsoever arising out of, or occasioned by, the Dealer’s or Distributor’s extension of said additional warranty or obligation
Certificate of General Equipment Warranty
Balzer Inc warrants new Products sold by it to be free from defects in material and/or workmanship for a period of one (1) year after the date of delivery to the first user and is subject to the following conditions:
1 Balzer Inc ’s obligation and liability under this Warranty is expressly limited to repairing or replacing at Balzer Inc ’s option any parts which, upon inspection by Balzer Inc , to have been defective in material or workmanship Such parts shall be provided at no cost to the user and shall be delivered to the business establishment of the authorized Balzer
Inc dealer or distributor of the Product during that dealer’s or distributor’s regular working hours
2 This Warranty shall NOT apply to component parts or accessories of Products not manufactured by Balzer Inc and which carry the warranty of the manufacturer thereof, or to normal maintenance (such as tune-up) or normal maintenance parts (such as oil filters)
3 Replacement or repair parts installed in this Product covered by this Warranty are warranted only for the remainder of this Warranty if such parts replaced were original components of said Product
Field Floater 6 Grain Cart User Manual 1
advertisement
Related manuals
advertisement
Table of contents
- 5 Company Statements
- 5 Accuracy
- 6 Contact Information
- 9 Safety
- 10 Mandatory Safety Shutdown Procedure
- 12 Vertical Auger Safety
- 13 PTO Operation Safety
- 16 Specifications
- 17 Dimensions
- 20 Pre-Operation Checks
- 22 Jack Storage
- 35 Quick Start Up and Use
- 36 Optional Roll Top Cover
- 36 Closing Roll Top Cover
- 37 Opening Roll Top Cover
- 39 Maintenance
- 40 Daily and Before Start of Season
- 49 Automatic Oiler
- 49 Before Start of Season
- 49 Daily Maintenance Checks
- 49 End of Season/Preparing for Storage
- 50 Auger Drive System
- 53 Troubleshooting
- 54 Steering Not Working Correctly
- 54 Brakes Not Working Properly
- 55 Automatic Oiler Not Working
- 56 Abnormal Auger Vibrations When Unloading
- 57 Upper Vertical Auger “Slams” Open
- 57 Joystick Will Not Work
- 57 Host Indicator Not Working/Error Codes
- 58 Scale Indicator Not Working/Error Codes
- 61 Weigh System Programming
- 62 Using Memory Locations
- 62 Naming a Memory Location
- 63 Storing to a Memory Location
- 64 Remove Weight from Memory Location
- 64 Recall a Memory Location
- 65 Export a Memory Location to USB
- 65 Export All Memory Locations to USB
- 66 Clear a Memory Location
- 66 Host Indicator Programming
- 66 Menu System Selection
- 67 Main Menu System
- 67 Clear All Memory Locations
- 68 Set Time and Date
- 69 Set Display Backlight
- 69 Set Weighing Units
- 69 Adjust Average Rate
- 70 Set Auto Power Off for Host Indicator
- 70 Set Hold Enable for Host Indicator
- 70 Set Print Continuous for Data Output
- 71 Set RS232 Port Baud Rate
- 71 Calibration Menu System
- 72 Set for Read Only Mode
- 72 Set Radio Enable
- 72 Set Radio Channel
- 73 Set Radio Channel Network ID
- 73 Set Radio Channel Encryption Key
- 73 Reset Radio to Default Settings
- 74 Scale Indicator Programming
- 75 Menu System Selection
- 75 Main Menu System
- 75 Set Display Backlight
- 75 Set Weighing Units
- 75 Adjust Average Rate
- 76 Set Auto Power Off for Scale Indicator
- 76 Set Hold Enable for Scale Indicator
- 76 Set RS232 Port Baud Rate
- 76 Calibration Menu System
- 76 Set Radio Enable
- 76 Set Radio Channel
- 76 Set Radio Channel Network ID
- 77 Set Radio Channel Encryption Key
- 77 Reset Radio to Default Settings
- 77 Set for Weigh Unit Changeable in Main Menu
- 77 Set Auto Zero Tracking
- 77 Set Graduation Size
- 79 Notes
- 89 Company Statements
- 89 Accuracy
- 89 To the Purchaser
- 89 Warranty Manufacture
- 90 Liability for Delays
- 90 Contact Information
- 91 Technical Data
- 93 Operation
- 94 Pre-Operation Checks
- 94 Track Break-in
- 94 Track Tension
- 95 Track Alignment
- 96 Maximizing Tread Life
- 97 Maintenance
- 98 Daily
- 98 Track Maintenance
- 99 Periodic Storage
- 99 Long Term Storage
- 100 Adjusting Track Tension
- 101 Adjusting Alignment
- 103 Notes