Dimensions. BALZER FIELD FLOATER 6 108 Pages
advertisement
TECHNICAL DATA
Dimensions
Overall Length
Bin Length
FIGURE 5
Wheel Base (Tandem)
Wheel Base (Tridem)
Bin Width
Travel Width
Overall Width
Specification
Overall
Length
Overall
Width*
Overall
Height**
Maximum OH
Clearance**
Travel Width*
Travel
Height**
Bin Length
Bin Width
Bin Height
Wheel Base
Ground
Clearance*
1450 (Tandem)
34’ 11 3/8”
(1065 cm)
24’ 7 1/8”
(750 cm)
18’ 1 3/4”
(553 cm)
22’ 7 5/8”
(690 cm)
15’ 9”
(480 cm)
13’ 0”
(344 cm)
26’ 5 7/8”
(807 cm)
15’ 2 1/2”
(464 cm)
7’ 5 3/8”
(227 cm)
86”
(218 cm)
19”
(48 cm)
Field Floater 6 Grain Carts
1450 (Tridem) 1700
34’ 11 3/8”
(1065 cm)
24’ 7 1/8”
(750 cm)
18’ 1 3/4”
(553 cm)
22’ 7 5/8”
(690 cm)
15’ 9”
(480 cm)
13’ 0”
(344 cm)
26’ 5 7/8”
(807 cm)
15’ 2 1/2”
(464 cm)
7’ 5 3/8”
(227 cm)
172”
(437 cm)
19”
(48 cm)
34’ 11 3/8”
(1065 cm)
24’ 7 1/8”
(750 cm)
18’ 1 3/4”
(553 cm)
22’ 7 5/8”
(690 cm)
15’ 9”
(480 cm)
13’ 0”
(375 cm)
26’ 5 7/8”
(807 cm)
15’ 2 1/2”
(464 cm)
8’ 5 7/8”
(259 cm)
172”
(437 cm)
19”
(48 cm)
2200
34’ 11 3/8”
(1065 cm)
24’ 7 1/8”
(750 cm)
18’ 1 3/4”
(553 cm)
22’ 7 5/8”
(690 cm)
15’ 9”
(480 cm)
13’ 11 3/4”
(426 cm)
26’ 5 7/8”
(807 cm)
15’ 2 1/2”
(464 cm)
10’ 1 7/8”
(310 cm)
172”
(437 cm)
19”
(48cm)
Capacity
Empty Weight
1450 Bushels 1450 Bushels 1700 Bushels 2200 Bushels
~30,000 lbs
(~13600 kgs)
~34,000 lbs
(~15425 kgs)
Field Floater 6 Grain Cart User Manual
~34,300 lbs
(~15560 kgs)
~35,000 lbs
(15880 kgs)
* This dimension does not include the increase in width due to the light kit since this can vary depending on the overall width of the tractor pulling this machine
** This dimension can vary depending on the tire size used on this machine
13
14 Field Floater 6 Grain Cart User Manual
Operation
Field Floater 6 Grain Cart User Manual 15
advertisement
Related manuals
advertisement
Table of contents
- 5 Company Statements
- 5 Accuracy
- 6 Contact Information
- 9 Safety
- 10 Mandatory Safety Shutdown Procedure
- 12 Vertical Auger Safety
- 13 PTO Operation Safety
- 16 Specifications
- 17 Dimensions
- 20 Pre-Operation Checks
- 22 Jack Storage
- 35 Quick Start Up and Use
- 36 Optional Roll Top Cover
- 36 Closing Roll Top Cover
- 37 Opening Roll Top Cover
- 39 Maintenance
- 40 Daily and Before Start of Season
- 49 Automatic Oiler
- 49 Before Start of Season
- 49 Daily Maintenance Checks
- 49 End of Season/Preparing for Storage
- 50 Auger Drive System
- 53 Troubleshooting
- 54 Steering Not Working Correctly
- 54 Brakes Not Working Properly
- 55 Automatic Oiler Not Working
- 56 Abnormal Auger Vibrations When Unloading
- 57 Upper Vertical Auger “Slams” Open
- 57 Joystick Will Not Work
- 57 Host Indicator Not Working/Error Codes
- 58 Scale Indicator Not Working/Error Codes
- 61 Weigh System Programming
- 62 Using Memory Locations
- 62 Naming a Memory Location
- 63 Storing to a Memory Location
- 64 Remove Weight from Memory Location
- 64 Recall a Memory Location
- 65 Export a Memory Location to USB
- 65 Export All Memory Locations to USB
- 66 Clear a Memory Location
- 66 Host Indicator Programming
- 66 Menu System Selection
- 67 Main Menu System
- 67 Clear All Memory Locations
- 68 Set Time and Date
- 69 Set Display Backlight
- 69 Set Weighing Units
- 69 Adjust Average Rate
- 70 Set Auto Power Off for Host Indicator
- 70 Set Hold Enable for Host Indicator
- 70 Set Print Continuous for Data Output
- 71 Set RS232 Port Baud Rate
- 71 Calibration Menu System
- 72 Set for Read Only Mode
- 72 Set Radio Enable
- 72 Set Radio Channel
- 73 Set Radio Channel Network ID
- 73 Set Radio Channel Encryption Key
- 73 Reset Radio to Default Settings
- 74 Scale Indicator Programming
- 75 Menu System Selection
- 75 Main Menu System
- 75 Set Display Backlight
- 75 Set Weighing Units
- 75 Adjust Average Rate
- 76 Set Auto Power Off for Scale Indicator
- 76 Set Hold Enable for Scale Indicator
- 76 Set RS232 Port Baud Rate
- 76 Calibration Menu System
- 76 Set Radio Enable
- 76 Set Radio Channel
- 76 Set Radio Channel Network ID
- 77 Set Radio Channel Encryption Key
- 77 Reset Radio to Default Settings
- 77 Set for Weigh Unit Changeable in Main Menu
- 77 Set Auto Zero Tracking
- 77 Set Graduation Size
- 79 Notes
- 89 Company Statements
- 89 Accuracy
- 89 To the Purchaser
- 89 Warranty Manufacture
- 90 Liability for Delays
- 90 Contact Information
- 91 Technical Data
- 93 Operation
- 94 Pre-Operation Checks
- 94 Track Break-in
- 94 Track Tension
- 95 Track Alignment
- 96 Maximizing Tread Life
- 97 Maintenance
- 98 Daily
- 98 Track Maintenance
- 99 Periodic Storage
- 99 Long Term Storage
- 100 Adjusting Track Tension
- 101 Adjusting Alignment
- 103 Notes