Using Memory Locations. BALZER FIELD FLOATER 6

WEIGH SYSTEM PROGRAMMING

Using Memory Locations

The weighing system is capable of 99 separate memory storage locations These locations can be used to separate fields, seed varieties, grain type, or any reason you need

The Alpha-Numeric keypad is used to set the names of memory locations or to enter specific numerical data into a menu setting ( Figure 80 )

FIGURE 80

Naming a Memory Location

When needing to enter letters or symbols, such as when setting the ID for a memory location, press the desired alpha-numeric key in rapid succession to cycle through the number/character until the desired character is displayed The memory location

ID is limited to five characters

Program a Memory Location

Button

Press

Screen

Display Description

Display will flash

Moves forward one memory location

Moves backward one memory location

Moves forward ten memory locations

Moves backward ten memory locations

Underline will be flashing indicating for you to enter the first letter of the location name

Press three times to get the letter C

Press three times to get the letter O

Press three times to get the letter R

58 Field Floater 6 Grain Cart User Manual