Set Radio Channel Network ID. BALZER FIELD FLOATER 6

WEIGH SYSTEM PROGRAMMING

Host Indicator Programming (Continued)

Set Radio Channel Network ID

The following steps will set the radio channel to transmit through a specific personal network ID This Network ID must be the same on all devices to be wirelessly connected with this indicator

Step

Set Radio Channel Network ID

Button Entry Option Display

Select Channel The default selection is 08000 - display will be flashing Use the numeric keypad to enter the personal network ID number (0-

65534)

Accept your selection

Set Radio Channel Encryption Key

The following steps will set the indicator for encrypted wireless transmission This Encryption Key must be the same on all devices to be wirelessly connected with this indicator NOTE: IF YOU FORGET THE ENCRYPTION KEY VALUE, YOU

WILL NOT BE ABLE TO CONNECT A RECEIVING DEVICE AND WILL HAVE TO RESET THE RADIO TO ITS DEFAULT

SETTINGS, THEN REPROGRAM THE RADIO CHANNEL

Step

Set Encryption Enable

Button Entry Option Display

The default selection is no - display will be flashing

Select No or Yes

If wanting to change to Yes

Accept your selection If Yes, display will show the default encryption key (000000) Use the numeric keypad to enter the encryption key (0-

65534)

Accept your encryption key

Reset Radio to Default Settings

The following steps will reset the indicator radio settings to their default values

Reset Radio Defaults

Step Button Entry Option

The default selection is 0 - display will be flashing Use the numeric keypad to enter

3 to reset the radio channels to their default values

Accept your selection

Display

Field Floater 6 Grain Cart User Manual 69