Menu System Selection. BALZER FIELD FLOATER 6 108 Pages
advertisement
WEIGH SYSTEM PROGRAMMING
Scale Indicator Programming
If at any time you are accessing a menu location and are making a change to that setting which is either incorrectly being entered or shouldn’t be changed, press the Power button current menu setting being accessed
This will turn the unit off without making any changes to the
Menu System Selection
The following steps will allow you to select which menu system you want to access:
Step
Access Menu system
Button Entry Option Display
Enter menu system code The default selection is for the main menu
Enter 477 to access the Calibration menu
Continue to selected menu system
Main Menu System
The following options are accessible through the main menu system:
Display Function
Not used with Grain
Carts
Definition
LCD Display Backlight Sets the backlight mode for the LCD display The red oval above the display is a light sensor
Unit of Weight
Average Rate
Auto Off
Sets the weighing unit between pounds and kilograms Changing units on the Host Indicator will also change the units on the Scale Indicator
The rate at which the output of the load cells is read by the Scale Indicator
This is in 1/4 second increments Changing the rate on the Host Indicator will also change the rate on the Scale Indicator
Amount of time (in minutes) before the weigh system turns off from inactivity
Hold Enable
Print Baud Rate
Activates or deactivates the capability of locking the currently displayed weight
The rate the RS232 output occurs This must match the rate of the device attached to the RS232 port
Set Display Backlight
Set Weighing Units
Adjust Average Rate
Field Floater 6 Grain Cart User Manual 71
advertisement
