[PICTURE] menu. Panasonic PT-FRQ60BU7, PT-FRQ60WU7

Add to my manuals
221 Pages

advertisement

[PICTURE] menu. Panasonic PT-FRQ60BU7, PT-FRQ60WU7 | Manualzz

Chapter 4   Settings — [PICTURE] menu

[PICTURE] menu

On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.

Refer to “Navigating through the menu” ( x page 63) for the operation of the menu screen.

[PICTURE MODE]

You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.

1) Press as

to select [PICTURE MODE].

2) Press qw

or the <ENTER> button.

f

The [PICTURE MODE] individual adjustment screen is displayed.

3) Press qw

to switch the item.

f

The items will switch each time you press the button.

[STANDARD]

[CINEMA]

[NATURAL]

[REC709]

[DICOM SIM.]

[DYNAMIC]

[GRAPHIC]

The image becomes suitable for video images in general.

The image becomes suitable for movie contents.

The image becomes suitable for using in a relatively dark environment.

The image becomes Rec.709 compliant when the setting other than [PICTURE MODE] is set to the factory default.

The image becomes similar to that of DICOM Part 14 Grayscale Standard.

The light output is maximized for use in bright areas.

The image becomes suitable for input from the personal computer.

Note f

The factory default picture mode is [GRAPHIC] for computer signal input and [STANDARD] for video signal input.

f

Rec.709 is an abbreviation of “ITU-R Recommendation BT.709” and is a color standard of high-vision broadcasting.

f

DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the

DICOM name is used, the projector is not a medical device, and display images should not be used for medical purposes such as diagnosis.

[CONTRAST]

You can adjust the contrast of the colors.

1) Press as

to select [CONTRAST].

2) Press qw

or the <ENTER> button.

f

The [CONTRAST] individual adjustment screen is displayed.

3) Press qw

to adjust the level.

Operation

Press w

.

Press q

.

Adjustment

The screen becomes brighter.

The screen becomes darker.

Range of adjustment

-31 - +31

Attention f

Adjust the [PICTURE] menu → [BRIGHTNESS] first when you need to adjust the black level.

[BRIGHTNESS]

You can adjust the dark (black) part of the projected image.

1) Press as

to select [BRIGHTNESS].

2) Press qw or the <ENTER> button.

f

The [BRIGHTNESS] individual adjustment screen is displayed.

3) Press qw

to adjust the level.

Operation

Press w

.

Press q

.

Adjustment

Increases the brightness of the dark (black) parts of the screen.

Reduces the brightness of the dark (black) parts of the screen.

Range of adjustment

-31 - +31

68 - ENGLISH

Chapter 4   Settings — [PICTURE] menu

[COLOR]

You can adjust the color saturation of the projected image.

1) Press as to select [COLOR].

2) Press qw

or the <ENTER> button.

f The [COLOR] individual adjustment screen is displayed.

3) Press qw

to adjust the level.

Operation

Press w

.

Press q

.

Deepens colors.

Weakens colors.

Adjustment

[TINT]

You can adjust the skin tone in the projected image.

1) Press as

to select [TINT].

2) Press qw

or the <ENTER> button.

f The [TINT] individual adjustment screen is displayed.

3) Press qw

to adjust the level.

Operation

Press w

.

Press q

.

Adjustment

Adjusts skin tone toward greenish color.

Adjusts skin tone toward reddish purple.

Range of adjustment

-31 - +31

Range of adjustment

-31 - +31

[COLOR TEMPERATURE]

You can switch the color temperature if the white areas of the projected image are bluish or reddish.

Adjusting with color temperature

1) Press as

to select [COLOR TEMPERATURE].

2) Press qw

or the <ENTER> button.

f

The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3) Press qw to switch the item.

f

The items will switch each time you press the button.

[DEFAULT]

[USER1]

[USER2]

[3200K] - [13000K]

Factory default setting.

Adjusts white balance as desired. Refer to “Adjusting desired white balance” ( x

page 69) for details.

Sets the value in increments of 100 K.

Select an item so that images become natural.

Note f

[DEFAULT] cannot be selected when the [PICTURE] menu → [PICTURE MODE] is set to [DICOM SIM.].

f f

The item is fixed to [USER1] when the [DISPLAY OPTION] menu

The color temperature numerical values are estimates.

→ [COLOR MATCHING] is set to anything other than [OFF].

Adjusting desired white balance

1) Press as

to select [COLOR TEMPERATURE].

2) Press qw

or the <ENTER> button.

f

The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3) Press qw

to select [USER1] or [USER2].

ENGLISH - 69

Chapter 4   Settings — [PICTURE] menu

4) Press the <ENTER> button.

f

The [COLOR TEMPERATURE] screen is displayed.

5) Press as to select [WHITE BALANCE].

6) Press the <ENTER> button.

f The [WHITE BALANCE] screen is displayed.

7) Press as

to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].

8) Press the <ENTER> button.

f

The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.

9) Press as

to select [RED], [GREEN], or [BLUE].

10) Press qw to adjust the level.

Item

[RED]

[GREEN]

[BLUE]

Operation

Press w

.

Press q

.

Press w

.

Press q

.

Press w

.

Press q

.

Adjustment

Deepens red.

Weakens red.

Deepens green.

Weakens green.

Deepens blue.

Weakens blue.

Range of adjustment

[WHITE BALANCE HIGH]: 0 - +255 (factory default is +255)

[WHITE BALANCE LOW]: 127 - +127 (factory default is 0)

Note f

Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the factory default setting.

Adjusting to desired white balance based on existing color temperature settings

1) Press as to select [COLOR TEMPERATURE].

2) Press qw

or the <ENTER> button.

f The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3) Press qw

to select anything other than [DEFAULT], [USER1], or [USER2].

4) Press the <ENTER> button.

f

The [CHANGE TO *****] screen is displayed.

5) Press as

to select [USER1] or [USER2].

6) Press the <ENTER> button.

f

The confirmation screen is displayed.

7) Press qw

to select [OK], and press the <ENTER> button.

f

The [USER1] or [USER2] data is overwritten.

f f

The data is not overwritten when [CANCEL] is selected with

The [WHITE BALANCE HIGH] screen is displayed.

qw

and the <ENTER> button is pressed.

8) Press as to select [RED], [GREEN], or [BLUE].

9) Press qw

to adjust the level.

Note f

Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the factory default setting.

f

When color temperature has been changed, the colors before and after the change will differ slightly.

70 - ENGLISH

Chapter 4   Settings — [PICTURE] menu

Changing the name of [USER1] or [USER2]

1) Press as

to select [COLOR TEMPERATURE].

2) Press qw

or the <ENTER> button.

f

The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3) Press qw

to select [USER1] or [USER2].

4) Press the <ENTER> button.

f

The [COLOR TEMPERATURE] screen is displayed.

5) Press as

to select [COLOR TEMPERATURE NAME CHANGE].

6) Press the <ENTER> button.

f The [COLOR TEMPERATURE NAME CHANGE] screen is displayed.

7) Press asqw

to select the text, and press the <ENTER> button to enter the text.

8) Press asqw

to select [OK], and press the <ENTER> button.

f

The name set to color temperature is changed.

Note f

The display of [USER1] or [USER2] is also changed when the name is changed.

[WHITE GAIN]

Adjust the brightness of the white part of the image.

1) Press as

to select [WHITE GAIN].

2) Press qw

or the <ENTER> button.

f

The [WHITE GAIN] individual adjustment screen is displayed.

3) Press qw to adjust the level.

Operation

Press w

.

Press q

.

Adjustment

Brightness of the white part gets stronger.

The image becomes more natural.

Range of adjustment

0 - +10

[GAMMA]

You can switch gamma mode.

1) Press as

to select [GAMMA].

2) Press qw or the <ENTER> button.

f

The [GAMMA] individual adjustment screen is displayed.

3) Press qw

to switch the item.

f

The items will switch each time you press the button.

[DEFAULT]

[USER]

[HDR ST2084-500]

[HDR ST2084-1000]

Gamma mode unique to this projector.

Uses the gamma data registered by the user.

(Registration requires separate software. Consult your dealer.)

Gamma mode compliant with SMPTE ST 2084 that assumes a highest luminance of 500 cd/m supports HDR (High Dynamic Range).

2 and

Gamma mode compliant with SMPTE ST 2084 that assumes a highest luminance of 1 000 cd/m 2 and supports HDR (High Dynamic Range).

Gamma mode compliant with ITU-R BT.2100 (HLG: Hybrid Log Gamma system) that supports HDR

(High Dynamic Range).

[HDR HLG]

[1.8]

[2.0]

[2.2]

Set so that images become as you like.

ENGLISH - 71

Chapter 4   Settings — [PICTURE] menu

Note f

In the following cases, the gamma mode is automatically set based on the InfoFrame information while displaying the image with the

InfoFrame information added, so the gamma mode cannot be selected. If the information necessary for supporting HDR (High Dynamic

Range) is not included in the InfoFrame information added to the displayed image signal, it will follow the [GAMMA] setting.

g

When the [DISPLAY OPTION] menu → [HDMI1 IN] / [HDMI2 IN] → [AUTO GAMMA SELECT] is set to [ENABLE], and the HDMI input is selected g

When the [DISPLAY OPTION] menu → [DIGITAL LINK IN] → [AUTO GAMMA SELECT] is set to [ENABLE], and the DIGITAL LINK input is selected

Setting [HDR HLG SYSTEM GAMMA]

Set the system gamma to be applied to the [USER] and [HDR HLG] gamma modes. This system gamma is defined by the ITU-R BT.2100 standard.

1) Press as

to select [GAMMA].

2) Press qw

or the <ENTER> button.

f

The [GAMMA] individual adjustment screen is displayed.

3) Press qw

to select [USER] or [HDR HLG], and press the <ENTER> button.

f The [GAMMA] screen is displayed.

f

When [HDR HLG] is selected, proceed to Step 5) .

4) Press as

to select [HDR HLG SYSTEM GAMMA].

5) Press qw

to switch the item.

f

The items will switch each time you press the button.

f [1.00] - [1.62] can be set in increments of 0.01.

Changing the name of [USER]

1) Press as

to select [GAMMA].

2) Press qw or the <ENTER> button.

f

The [GAMMA] individual adjustment screen is displayed.

3) Press qw

to select [USER].

4) Press the <ENTER> button.

f The [GAMMA] screen is displayed.

5) Press as

to select [GAMMA NAME CHANGE].

6) Press the <ENTER> button.

f

The [GAMMA NAME CHANGE] screen is displayed.

7) Press asqw

to select the text, and press the <ENTER> button to enter the text.

8) Press asqw to select [OK], and press the <ENTER> button.

f

The selected gamma name is changed.

Note f

When a name is changed, display of [USER] is also changed.

[DAYLIGHT VIEW]

You can correct the image to the optimal vividness even if it is projected under a bright light.

1) Press as

to select [DAYLIGHT VIEW].

2) Press qw

or the <ENTER> button.

f

The [DAYLIGHT VIEW] individual adjustment screen is displayed.

72 - ENGLISH

Chapter 4   Settings — [PICTURE] menu

3) Press qw

to switch the item.

f

The items will switch each time you press the button.

[OFF]

[1]

[2]

[3]

No correction.

Corrects the image to weaken vividness.

Corrects the image to medium vividness.

Corrects the image to high vividness.

[SHARPNESS]

You can adjust the sharpness of the projected image.

1) Press as

to select [SHARPNESS].

2) Press qw

or the <ENTER> button.

f The [SHARPNESS] individual adjustment screen is displayed.

3) Press qw

to adjust the level.

Operation

Press w

.

Press q

.

Contours become sharper.

Contours become softer.

Adjustment Range of adjustment

0 - +15

Note f

If you press w

while the adjustment value is [+15], the value will become [0]. If you press q

while the adjustment value is [0], the value will become [+15].

[NOISE REDUCTION]

You can reduce noises when the input image is degraded and noise is occurring in the image signal.

1) Press as

to select [NOISE REDUCTION].

2) Press qw

or the <ENTER> button.

f The [NOISE REDUCTION] individual adjustment screen is displayed.

3) Press qw

to switch the item.

f

The items will switch each time you press the button.

[OFF]

[1]

[2]

[3]

No correction.

Slightly corrects the noise.

Moderately corrects the noise.

Strongly corrects the noise.

Attention f

When this is set for an input signal with less noise, the image may look different from the original image. In such a case, set it to [OFF].

Note f

In the following cases, the [NOISE REDUCTION] function is disabled.

g

When a signal with the resolution of 2 560 x 1 600, 3 840 x 2 160, or 4 096 x 2 160 is input g

When [EDGE BLENDING] is set to anything other than [OFF]

[DYNAMIC CONTRAST]

Light adjustment of the light source and signal compensation are performed automatically according to the image to make the contrast optimum for the image.

1) Press as

to select [DYNAMIC CONTRAST].

2) Press qw

or the <ENTER> button.

f

The [DYNAMIC CONTRAST] individual adjustment screen is displayed.

3) Press qw

to switch the item.

f

The items will switch each time you press the button.

ENGLISH - 73

Chapter 4   Settings — [PICTURE] menu

[OFF]

[1]

[2]

Disables the dynamic contrast function.

Adjusts the light source and compensates signals to a small extent.

Adjusts the light source and compensates signals to a large extent.

Note f

The brightness control function and the dynamic contrast function will operate simultaneously, but the dynamic contrast function will not operate while measuring the brightness and the color.

[COLOR SPACE]

Set the color space used for the color representation of the image.

1) Press as

to select [COLOR SPACE].

2) Press qw

or the <ENTER> button.

f

The [COLOR SPACE] individual adjustment screen is displayed.

3) Press qw

to switch the item.

f

The items will switch each time you press the button.

[NATIVE]

[ITU-709]

[DCI-P3 emu.]

[ITU-2020 emu.]

Displays the image with a color space unique to this projector.

Displays the image with a color space compliant with the ITU-R BT.709 standard.

Displays the image with a color space close to DCI-P3.

Displays the image with a color space close to the ITU-R BT.2020 standard.

Note f

DCI-P3 is the specifications of the digital cinema color region defined by the Digital Cinema Initiatives (DCI).

f

In the following cases, the color space is automatically set based on the InfoFrame information while displaying the image with the InfoFrame information added, so the [COLOR SPACE] cannot be set. If the information necessary for supporting HDR (High Dynamic Range) is not included in the InfoFrame information added to the displayed image signal, it will follow the [COLOR SPACE] setting.

g

When the [DISPLAY OPTION] menu → [HDMI1 IN] / [HDMI2 IN] → [AUTO COLOR SPACE SELECT] is set to [ENABLE], and the HDMI input is selected g

When the [DISPLAY OPTION] menu → [DIGITAL LINK IN] → [AUTO COLOR SPACE SELECT] is set to [ENABLE], and the DIGITAL

LINK input is selected

[SYSTEM SELECTOR]

The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal.

1) Press as

to select [SYSTEM SELECTOR].

2) Press the <ENTER> button.

3) Press as

to select a system format.

f Available system formats vary depending on the input signal.

Terminal

<COMPUTER IN> terminal

<HDMI IN 1> terminal, <HDMI

IN 2> terminal, <DIGITAL

LINK/LAN> terminal

System format

576/50p signal Select [RGB] or [YC

B

C

R

].

640 x 480/60 or 480/60p signal Select [640x480/60], [480/60p YC

B

C

R

], or [480/60p RGB].

Other video signals Select [RGB] or [YP

B

P

R

].

480/60p, or 576/50p signal Select [AUTO], [RGB], or [YC

B

C

R

].

Other video signals Select [AUTO], [RGB], or [YP

B

P

R

].

4) Press the <ENTER> button.

Note f For details of the types of image signals that can be used with the projector, refer to “List of compatible signals” ( x page 215).

f This may not function properly for some connected external devices.

sRGB-compliant video

sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International

Electrotechnical Commission).

74 - ENGLISH

Chapter 4   Settings — [PICTURE] menu

Set according to the following steps to reproduce more faithful, sRGB compliant colors.

1) Set [COLOR MATCHING] to [OFF].

f Refer to [COLOR MATCHING] ( x page 90).

2) Display the [PICTURE] menu.

f Refer to “[PICTURE] menu” ( x page 68).

3) Press as

to select [PICTURE MODE].

4) Press qw

to set [REC709].

5) Press as to select [GAMMA].

6) Press qw

or the <ENTER> button.

f The [GAMMA] individual adjustment screen is displayed.

7) Press qw

to select [2.2].

8) Press as

to select [COLOR].

9) Press the <DEFAULT> button on the remote control to set the factory default setting.

10) Follow Steps 8) to 9) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], and [DAYLIGHT VIEW] to the factory default settings.

Note f sRGB is available for RGB signal input only.

ENGLISH - 75

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents