Using HDMI-CEC function. Panasonic PT-FRQ60BU7, PT-FRQ60WU7

Add to my manuals
221 Pages

advertisement

Using HDMI-CEC function. Panasonic PT-FRQ60BU7, PT-FRQ60WU7 | Manualzz

Chapter 5   Operations — Using HDMI-CEC function

Using HDMI-CEC function

HDMI-CEC function allows the basic operation of CEC-compatible device with the projector remote control or the link control between the projector and CEC-compatible device.

Connecting a CEC-compatible device

Connect a CEC-compatible device to the <HDMI IN 1> terminal or <HDMI IN 2> terminal.

HDMI cable (commercially available)

Repeater

CEC-compatible device

Blu-ray disc player (example)

CEC-compatible device

Blu-ray disc player (example)

Connection example with CEC-compatible device

Setting the projector and CEC-compatible device

Before using the HDMI-CEC function, you need to configure the settings on the projector and the CEC-compatible device.

f

CEC-compatible device: enable the HDMI-CEC function.

f Projector: Set the [PROJECTOR SETUP] menu → [HDMI CEC] to [ON]. ( x page 125)

Note f

After switching on the CEC-compatible device, switch on the projector and select HDMI1 input or HDMI2 input, then check that the image from the CEC-compatible device is projected correctly.

Operating the CEC-compatible device with the projector remote control

You can operate the device using the projector remote control by calling up the operation menu of the CECcompatible device from the HDMI-CEC operation screen. Use the number buttons (<2>, <5>, <8>) on the remote control to select the operation item on the HDMI-CEC operation screen.

About the HDMI-CEC operation screen, refer to“Operating a CEC-compatible device” ( x

page 125).

(Device name)

1

2

3

4

HDMI-CEC operation screen

1 Displays the device name to be operated.

2 [MENU]

Call up the operation menu of the CEC-compatible device.

3 [POWER]

Switch on/off the device.

4 [RETURN]

Returns the operation menu of the CEC-compatible device to the previous screen.

Note f

If the operation menu of the CEC-compatible device cannot be called up from the HDMI-CEC operation screen, change the menu code setting. For the operation details , refer to “Changing the menu code” ( x

page 125).

ENGLISH - 183

Chapter 5   Operations — Using HDMI-CEC function f

If you cannot operate the operation menu of a CEC-compatible device, try setting the [PROJECTOR SETUP] menu → [HDMI CEC] to [OFF] and [ON] again. It may be improved.

Menu operation of CEC-compatible device

When the setting menu of the CEC-compatible device is displayed, you can use the ▲▼◀▶ buttons and

<ENTER> button of the remote control to operate the menu.

About the link control

By setting the [PROJECTOR SETUP] menu → [HDMI CEC] → [PROJECTOR -> DEVICE] / [DEVICE ->

PROJECTOR] to a setting other than [DISABLE], the following link operations can be achieved.

The link control setting of [PROJECTOR -> DEVICE]

r

When the setting is [POWER OFF] or [POWER ON / OFF]

f

If the projector is switched off, all connected CEC-compatible devices are switched off.

r

When the setting is [POWER ON / OFF]

f If the input channel is HDMI1 or HDMI2 when the projector is switched on and starts projection, then the CECcompatible devices connected to the <HDMI IN 1> terminal or <HDMI IN 2> terminal are switched on upon startup of the projector.

The link control setting of [DEVICE -> PROJECTOR]

r

When the setting is [POWER ON] or [POWER ON / OFF]

f

While the projector is in standby, if the CEC-compatible device is turned on, the projector turns on and switches to the input that the CEC-compatible device is connected.

f

While the projector is in standby, if the CEC-compatible device starts playing, the projector turns on and switches to the input that the CEC-compatible device is connected.

f

While the projector is turned on, if the CEC-compatible device starts playing, the projector switches to the input that the CEC-compatible device is connected.

r

When the setting is [POWER ON / OFF]

f

When the CEC-compatible device connected to the selected input (HDMI1 or HDMI2) is switched off, the projector enters standby mode.

Note f

Depending on the status of the device, such as when the projector or the CEC-compatible device is starting up, the link control may not operate normally.

f

If the CEC-compatible device does not support CEC 1.4, it may not support the link control described in the manual.

f

Depending on the connected CEC-compatible device, the link control may not operate normally.

184 - ENGLISH

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents