Step 8 - Finish Installation. Ancona AN-2330SS, AN-2348SSRD, AN-2336SSRD, AN2336SSRD, AN-2348SSWHT, AN-2348SSBK, AN-2330SSRD, AN-2330SSWHT, AN-2330SSBK, AN-2336SS

Add to my manuals
32 Pages

advertisement

Step 8 - Finish Installation. Ancona AN-2330SS, AN-2348SSRD, AN-2336SSRD, AN2336SSRD, AN-2348SSWHT, AN-2348SSBK, AN-2330SSRD, AN-2330SSWHT, AN-2330SSBK, AN-2336SS | Manualzz

Installation

• The power cord is equipped with a three-prong

(grounding) plug which mates with a standard threeprong grounding wall receptacle to minimize the possibility of electrical shock hazard from the appliance.

• All cord connected appliance shall include instructions relative to location of the wall receptacle and a warning to the user to disconnect the electrical supply before serving the appliance.

• Where a standard two-prong wall receptacle is encountered, it is the responsibility and obligation of the customer to have it replaced with a properly grounded threeprong wall receptacle. Do not cut or remove the grounding prong from the power cord.

Figure 13 Figure 14 Figure 15

WARNING:

• Never use reductions, shunts, or adapters which can cause overheating or burning.

• Make sure the AC Supply cable does not come in contact with any parts or components that get hot.

STEP 8

Finish Installation

u When all connections have been made, check that all range controls are in the “off” position and turn on the main gas supply valve.

— 20 —

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals