Griddle Operation (applicable models only). Ancona AN-2330SS, AN-2348SSRD, AN-2336SSRD, AN2336SSRD, AN-2348SSWHT, AN-2348SSBK, AN-2330SSRD, AN-2330SSWHT, AN-2330SSBK, AN-2336SS

Add to my manuals
32 Pages

advertisement

Griddle Operation (applicable models only). Ancona AN-2330SS, AN-2348SSRD, AN-2336SSRD, AN2336SSRD, AN-2348SSWHT, AN-2348SSBK, AN-2330SSRD, AN-2330SSWHT, AN-2330SSBK, AN-2336SS | Manualzz

Operation

Griddle Operation (applicable models only)

Before Using the Griddle Use of the Griddle

u Clean the griddle thoroughly with warm, soapy water to remove dust or any protective coating.

u Push and turn the control knob counter-clockwise to the preferred cooking temperature.

v Rinse with clean water and wipe off to dry with soft, clean, lint-free cloth.

w A stainless steel cover that is sized to fit on top of the surface when the griddle is not being used is provided. Please note that the cover must be removed before turning the griddle on.

v Preheat the griddle for 10-12 minutes.

w When the griddle is preheated to the desired temperature, the indicator light will turn on.

x Butter or cooking oil can be added for more flavor, before placing the food to cook.

x Make sure the grease tray is under the front edge of the griddle. Position the tray under the griddle overhang to catch grease or food residue.

WARNING:

The surface of the griddle is hot after use. Please allow sufficient time for the griddle to cool prior to cleaning.

Maintenance

Replacing the Oven Light

u To prevent electrical shock or personal injury, make sure the oven and light bulb are cool and power to the oven has been turned off before replacing the light bulb. v Turn off the power at the main power supply.

w Remove the lens cover from the housing by pulling straight out.

x Replace light and make sure the lens cover is in place when using the oven.

— 27 —

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals