Pre-delivery Checklist. Sleipner SE80/185T-12IP, SE80/185T-24IP, SE120/215T-24IP

Add to My manuals
24 Pages

advertisement

Pre-delivery Checklist. Sleipner SE80/185T-12IP, SE80/185T-24IP, SE120/215T-24IP | Manualzz

Pre-delivery Checklist

[].......... The bolts holding the gear house and motor bracket together are tightened correctly.

MC_0033

[].......... The bolts holding the motor to its bracket are tightened correctly.

[].......... All electrical connections are clean, dry and tight, and the correct cable, fuse and main

switch size.

[].......... Check that there is no electrical connection between the electro motor body and positive

terminal on the motor, and between the electro motor body and the negative (A1) terminal

on the motor with an ohm meter.

[].......... Anti-fouling has been applied to the gear house and propeller but NOT anodes, sealing/

rubber fi ttings or propeller shafts.

[].......... Propeller is fastened correctly to the shaft.

[].......... Propeller turns freely in tunnel.

[].......... The anode and/ or holding screw is tightened well with thread glue.

[].......... Check the boat for potential water leakage around installation areas.

[].......... Correct drive direction as per control panel.

[].......... User Manual is supplied to the owner.

The thruster has been installed as per the instructions in this manual and all points in checklist above have been controlled.

Signed: .........................................................................................

Date: .............................................................................................

Thruster type: ................................................................................................................................................................................................

Serial number:...............................................................................................................................................................................................

Date of delivery:.............................................................................................................................................................................................

Correct drive direction as per control panel: ..................................................................................................................................................

The compartment for the thruster has been isolated from general bilge water and has no obvious or suspected risks for flooding:

......................................................................................................................................................................................................................

......................................................................................................................................................................................................................

......................................................................................................................................................................................................................

Other comments by installer: ........................................................................................................................................................................

.......................................................................................................................................................................................................................

.......................................................................................................................................................................................................................

SE IP 80 & SE IP 120 2685 15 2022 21

advertisement

Related manuals