Conversion table. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Conversion table. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

1

1.6

Information on This Document

How to use this document

1.6.7

10

CAUTION

The signal word CAUTION warns of a hazardous situation which will result in minor to moderate injuries if the warning sign is ignored.

Example of a warning sign:

WARNING

Eye damage caused by flying dirt particles

When cleaning with compressed air, dirt particles are ejected at high speed and could get into the eyes. Therefore eyes could be hurt.

„ Keep people away from the working area.

„ Wear personal protective equipment when performing cleaning work with compressed air

(e.g. eye protection).

Warnings of property damage/environmental damage

Warnings of property/environmental damage are separated from the remaining text and marked with "Notice".

Example:

NOTICE

Gearbox damage due to low oil level

The gearboxes could be damaged when the oil level is too low.

„ Check gear oil level at regular intervals and top up oil, if necessary.

„ Check gear oil level approx. 3 to 4 hours after the machine has been switched off. Check oil level only when machine is in horizontal position.

Notices with information and recommendations

Additional information and recommendations for trouble-free and productive operation of the machine are separated from the remaining text and marked with “Information”.

Example:

INFO

Each safety sign is provided with an order number and can be ordered directly from the manufacturer or from an authorised specialist dealer.

Conversion table

The following table can be used to convert metric units into US units.

Size

Area

SI units (metric)

Unit name Abbreviation

Hectare ha

Volume flow Litres per minute L/min

Cubic metres per hour m³/h

Factor

2.47105

0.2642

4.4029

Inch-pound units

Unit name

Acre

US gallons per minute

Abbreviation acres gpm

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

Size

Force

Length

Power

Pressure

Torque

Velocity

SI units (metric)

Unit name Abbreviation

Newton N

Millimetre

Metre mm m

Kilowatt

Kilopascal

Megapascal bar (non-SI)

Newtonmeter kW kPa

MPa bar

Nm

Temperature Degrees Celsius °C

Information on This Document

How to use this document

Factor

0.2248

0.03937

3.2808

1.3410

0.1450

145.0377

14.5038

0.7376

Inch-pound units

Unit name Abbreviation

Pound force lbf

Inch

Foot in.

ft.

Horsepower

Pounds per square inch hp psi

8.8507

°Cx1.8+32

3.2808

pound-foot or foot-pound ft∙lbf pound-inch or inch-pound

Degrees

Fahrenheit in∙lbf

°F

Feet per minute ft/min

1

1.6

Volumes

Weight

Metres per minute

Metres per second

Kilometres per hour

Litres

Millilitre

Cubic centimetre

Kilogram m/min m/s km/h

L ml cm³ kg

3.2808

0.6215

0.2642

0.0338

0.0610

2.2046

Feet per second ft/s

Miles per hour mph

US gallon

US ounce

Cubic inch

US gal.

US oz.

in³

Pound lbs

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 11

advertisement

Related manuals

advertisement

Table of contents