Safety sign on the machine. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Safety sign on the machine. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

2

2.6

Safety

Safety sign on the machine

„ Clean the area around the components (for example gearbox, high-pressure filter) and make sure that no foreign objects get into the components or the hydraulic system.

„ Check installed seal rings for damage. Replace them if necessary.

„ Collect leaking oil and/or waste oil in a container provided for this purpose, and dispose of it

properly, see Page 21 .

2.6

Safety sign on the machine

Each safety sign is provided with an order number and can be ordered directly from the KRONE dealer. Immediately replace missing, damaged and unrecognisable safety signs.

When attaching safety signs, the contact surface on the machine must be clean and free of dirt, oil and grease to ensure optimum adhesion of the safety signs.

26

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

Safety

Safety sign on the machine

2

2.6

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 27

2

2.6

Safety

Safety sign on the machine

Location and meaning of the safety signs

For the “pushed” version

KM000-333

28

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

Safety

Safety sign on the machine

2

2.6

1.

Ord. no. 939 101 4 (1x)

2.

Ord. no. 939 471 1 (1x)

Danger when exceeding the maximum permissible PTO speed or the maximum permissible operating pressure

When exceeding the permissible PTO speed, machine parts may be destroyed or ejected.

If the maximum permissible operating pressure is exceeded, hydraulic parts may be damaged.

As a result, people may be seriously or fatally injured.

„ Observe the permissible PTO speed.

„ Observe the permitted operating pressure.

Danger due to incorrect operation and lack of knowledge

Incorrect operation and lack of knowledge of the machine as well as incorrect behaviour in hazardous situations is risking the life of the operator and third parties.

„ Before starting up the machine, read and follow the operating instructions and safety instructions.

3.

Ord. no. 939 576 0 (4x) a)

Danger due to rotating machine parts

When the machine has been switched off, there is risk of injury due to coasting machine parts.

„ Do not touch any moving parts of the machine.

„ Wait until the machine parts have come to a standstill.

b)

Danger from objects being flung out

When the machine is running, there is a risk of injury as objects may be flung out uncontrollably.

„ Before starting up, move the guards into their protective position.

c)

Danger from objects being flung out

When the machine is running, there is a risk of injury as objects may be flung out uncontrollably.

„ When the machine is running, keep your distance.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 29

2

2.6

Safety

Safety sign on the machine

4.

Ord. no. 942 197 1 (4x)

Danger from objects being ejected

When the machine is running, there is a risk of injury as objects may be flung out uncontrollably.

„ When the machine is running, keep your distance.

5.

Ord. no. 939 106 3 (1x)

Danger to life when exceeding the maximum permitted

PTO speed

When exceeding the permissible PTO speed, machine parts may be destroyed or ejected.

As a result, people may be seriously or fatally injured.

„ Observe the permissible PTO speed.

6.

Order no. 942 002 4 (1x)

7.

Ord. no. 27 021 591 0 (1x)

Danger due to rotating machine parts

When the machine is running, there is a risk of injury due to rotating machine parts.

„ Before starting up, move the guards into their protective position.

Danger if the regulating valves of the tractor are not locked

There is a risk of accidents if the regulating valves of the tractor are not locked.

„ To prevent functions from being triggered accidentally, the regulating valves of the tractor must be in neutral position and locked during road transport journeys.

30

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

Safety

Safety sign on the machine

2

2.6

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 31

2

2.6

Safety

Safety sign on the machine

For the “trailed” version

KM000-338

32

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

Safety

Safety sign on the machine

2

2.6

1.

Ord. no. 939 101 4 (1x)

2.

Ord. no. 939 471 1 (1x)

Danger when exceeding the maximum permissible PTO speed or the maximum permissible operating pressure

When exceeding the permissible PTO speed, machine parts may be destroyed or ejected.

If the maximum permissible operating pressure is exceeded, hydraulic parts may be damaged.

As a result, people may be seriously or fatally injured.

„ Observe the permissible PTO speed.

„ Observe the permitted operating pressure.

Danger due to incorrect operation and lack of knowledge

Incorrect operation and lack of knowledge of the machine as well as incorrect behaviour in hazardous situations is risking the life of the operator and third parties.

„ Before starting up the machine, read and follow the operating instructions and safety instructions.

3.

Ord. no. 939 576 0 (4x) a)

Danger due to rotating machine parts

When the machine has been switched off, there is risk of injury due to coasting machine parts.

„ Do not touch any moving parts of the machine.

„ Wait until the machine parts have come to a standstill.

b)

Danger from objects being flung out

When the machine is running, there is a risk of injury as objects may be flung out uncontrollably.

„ Before starting up, move the guards into their protective position.

c)

Danger from objects being flung out

When the machine is running, there is a risk of injury as objects may be flung out uncontrollably.

„ When the machine is running, keep your distance.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 33

2

2.6

Safety

Safety sign on the machine

4.

Ord. no. 942 197 1 (4x)

Danger from objects being ejected

When the machine is running, there is a risk of injury as objects may be flung out uncontrollably.

„ When the machine is running, keep your distance.

5.

Ord. no. 939 106 3 (1x)

Danger to life when exceeding the maximum permitted

PTO speed

When exceeding the permissible PTO speed, machine parts may be destroyed or ejected.

As a result, people may be seriously or fatally injured.

„ Observe the permissible PTO speed.

6.

Order no. 942 002 4 (1x)

Danger due to rotating machine parts

When the machine is running, there is a risk of injury due to rotating machine parts.

„ Before starting up, move the guards into their protective position.

7.

Ord. no. 942 196 1 (2x)

Danger due to crushing or shearing

Risk of injury due to crushing or shearing points on moving machine parts.

„ While parts are moving, never reach into areas where there is a risk of being crushed.

8.

Ord. no. 27 002 459 0 (1x)

Danger due to machine parts unintentionally folding down or swivelling out

Risk of injury for road users due to machine parts unintentionally folding down or swivelling out.

„ Whenever transporting the machine or driving on roads, ensure that the stop cock is closed.

34

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

advertisement

Related manuals

advertisement

Table of contents