Lubricating greases. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Lubricating greases. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

4.12.1

4.12.2

Technical data 4

Consumables 4.12

NOTICE

Machine damage due to mixing of oil

If oils, which have different specifications, are mixed with each other, the machine may be damaged.

„ Never mix oils, which have different specifications, with each other.

„ Contact your KRONE service partner before using an oil with a different specification after changing the oil.

Bio-degradable lubricants on request

Oils

Designation

Input gearbox

Main gearbox

Cutterbar

Filling quantity

1.7 l

0.9 l

7.0 l

Specification

SAE 90

SAE 90

SAE 90

Initial filling ex works

Wiolin ML 4 SAE 90

Wiolin ML 4 SAE 90

Wiolin ML 4 SAE 90

The filling quantities of the gearboxes are guide values. The correct values result from oil

change/oil level check, see Page 122 .

Lubricating greases

Designation

Manual lubrication points

Filling quantity

As required 1

Specification

Lubricating grease to DIN

51818 of NLGI class 2, Li soap with EP additives

1 Lubricate the lubrication point until grease comes out of the bearing position. After lubricating, remove the grease coming out of the bearing position.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 51

advertisement

Related manuals

advertisement

Table of contents