Adapting coupling points. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Adapting coupling points. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

6

6.4

Commissioning

Adapting coupling points

I 2 2 II 2 2

2

1 1

2 2

1 1

2

6.4

KMG000-054

1 1 1 1

I For "Pushed" version II For "Trailed" version

Mount the lighting system (1) according to the instructions for accessories kit (document number

150 001 118).

Adapting coupling points

Adapting the lower link pins

For the “pushed” version

Kat.II

Kat.II

1

Kat.III

2

3

KMG000-095

2

Lower link pins

The three-point linkage is designed for category II and III.

5

4

2

Kat.III

1

2 3

56

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

Commissioning

Adapting coupling points

Conversion to category II

„ Pull out the lower link pins (2).

„ Insert the lower link pins (2) through the ball sleeve cat. II (1).

„ Secure the lower link pins (2) by means of the linch pin (4) and the safety chain (5).

The shorter journal of the lower link pin (2) faces inwards.

6

6.4

Conversion to category III

„ Pull out the lower link pins (2).

„ Turn the lower link pins (2) by 180° and insert them through the ball sleeves cat. III (3).

„ Secure the lower link pins (2) by means of the linch pin (4) and the safety chain (5).

The longer journal of the lower link pin (2) faces inwards.

Top link pin

The top link pin (1) is designed for category II and III.

Kat.II

2

Kat.III

2

1 4 I

II

III

1 3

KMG000-096

Category II (Cat. II)

„ Loosen the linch pin (3) and pull out the top link pin (1).

„ Insert the top link bolt (1) in position (I), (II) or (III) and through the ball sleeve cat. II (2).

The thicker journal of the top link pin (1) faces outwards.

„ Secure the top link bolt (1) using the linch pin (3).

„ Make sure that the anti-twist lock (4) of the top link pin is in the recess.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 57

6

6.4

Commissioning

Adapting coupling points

Category III (Cat. III)

„ Loosen the linch pin (3) and pull out the top link pin (1).

„ Insert the top link bolt (1) in position (I), (II) or (III) and through the ball sleeve cat. III (2).

The thinner journal of the top link pin (1) faces outwards.

„ Secure the top link bolt using the linch pin (3).

„ Make sure that the anti-twist lock (4) of the top link pin is in the recess.

For the “trailed” version

Kat.II

Kat.II

58

1

Kat.III

2 2

Kat.III

1

5

4

3

KMG000-081

2 2 3

Lower link pins

The three-point linkage is designed for category II and III.

Conversion to category II

„ Pull out the lower link pins (2).

„ Insert the lower link pins (2) through the ball sleeve cat. II (1).

„ Secure the lower link pins (2) by means of the linch pin (4) and the safety chain (5).

The shorter journal of the lower link pin (2) faces inwards.

Conversion to category III

„ Pull out the lower link pins (2).

„ Turn the lower link pins (2) by 180° and insert them through the ball sleeves cat. III (3).

„ Secure the lower link pins (2) by means of the linch pin (4) and the safety chain (5).

The longer journal of the lower link pin (2) faces inwards.

Top link pin

The top link pin (1) is designed for category II and III.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

Kat.II

2

Commissioning

Adapting coupling points

Kat.III

6

6.4

2

1 4

1 3

II

I

KM000-351

Category II (cat. II)

„ Loosen the linch pin (3) and pull out the top link pin (1).

„ Insert the top link pin (1) in the position (I) or (II) and through the ball sleeve cat. II (2).

The thicker journal of the top link pin (1) is facing outwards.

„ Secure the top link pin with the linch pin (3).

„ Make sure that the anti-twist lock (4) of the top link pin is in the recess.

Category III (cat. III)

„ Insert the top link pin (1) in the position (I) or (II) and through the ball sleeve cat. III (2).

The thinner journal of the top link pin (1) is facing outwards.

„ Secure the top link pin with the linch pin (3).

„ Make sure that the anti-twist lock (4) of the top link pin is in the recess.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 59

advertisement

Related manuals

advertisement

Table of contents