Preparing tractor. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Preparing tractor. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

7.2

Minimum ballasting

Front/rear

Total weight

Front axle load

Actual value according to calculation kg kg

<

Permitted value according to operating instructions for the tractor

Start-up

Preparing tractor

Double permitted tyre load capacity

(two tyres)

7

7.2

kg

< kg kg

< kg

Rear axle load kg

< kg

< kg

Preparing tractor

NOTICE

Damage to the machine because the clearance is too small

If the clearance between the front wheels of the tractor and the machine is too low, the machine may be damaged during use.

„ Check the clearance between the front wheels of the tractor and the machine after placing the machine in service the first time and whenever changing the tractor wheels.

„ Check the clearance of the front wheels at all steering angles. If the guards or swath flaps come into contact with the front wheels of the tractor, mount the lower link extensions

between the lower links and the coupling triangle, see Page 66 .

+B -B

KM001-113

Prior to connecting the mower to the tractor, check whether the tractor can be connected with respect to the distances (A) and (+B/-B) as a function of the clearance. Connecting the universally-jointed drive shaft must be possible without any collision and with a small bending angle between mower and tractor. Follow the operating instructions of the universal shaft manufacturer.

For the “pushed” version

„ Check distance (A) and distance (+B/-B).

ð Distance (A)=900 mm

ð Distance (-B) (hidden lower link point)=200 mm

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 63

advertisement

Related manuals

advertisement

Table of contents