Tightening guard cloth. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Tightening guard cloth. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

7 Start-up

7.11

Tightening guard cloth

Connection from Tractor to the machine

The Camera Monitor System is connected with the 13-pin connecting cable (8) included in the delivery.

„ Connect the 13-pin plug of the connecting cable (8) with the 13-pin socket (9) of the machine.

„ Connect the 13-pin plug of the connecting cable (8) with the 13-pin socket (7) of the tractor.

„ Lay the cable such that it is not allowed to rub, be tightened, pinched or otherwise come into contact with other components, particularly when laid in corners.

7.11

Tightening guard cloth

7.12

2 1 2

KMG000-063

ü

The machine is shut down and safeguarded, see Page 24

.

„ Tighten the guard cloth (1) via the expanders (2) so that it does not come into contact with the tine conditioners.

Installing universal shaft

WARNING

Risk of injury by failure to take account of the danger zone of the universal shaft

If the danger zone of the universal shaft is ignored, persons can be seriously hurt or killed.

„ To avoid accidents, observe the danger zone of the universal shaft,

see Page 16

.

NOTICE

Changing the tractor

There is a risk of damaging the machine if the length of the universal shaft is not checked when the tractor is changed.

„ To prevent damage to the machine, check the length of the universal shaft whenever you change tractors. Have it corrected by a KRONE service partner if necessary.

74

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

advertisement

Related manuals

advertisement

Table of contents