Checking front end dimension. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Checking front end dimension. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

Start-up 7

Checking front end dimension 7.13

7.13

KMG000-048

“pushed” version “trailed” version

ü

The machine has been shut down and secured, see Page 24

.

ü The length of the PTO shaft is adapted as required by the currently used tractor.

„ Slip the universal shaft (1) onto the PTO shaft end of the tractor and secure it.

„ Secure the universal shaft guard with the supporting chain (2) against turning along with the shaft.

Checking front end dimension

KM000-265

INFO

Depending on the country

If the front end dimension “A” 3.5 m is exceeded, the road safety must be ensured by means of suitable aids (for example instructing accompanying person or mirror at the intersections), refer to the leaflet for accessory equipment issued by Federal Minister of Transport.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 75

advertisement

Related manuals

advertisement

Table of contents