Basic setting of mower. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Basic setting of mower. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

Start-up 7

Basic setting of mower 7.16

7.16

KMG000-017

ü

The machine is in the working position, see Page 85 .

ü

The machine has been shut down and secured, see Page 24

.

„ Straighten bent and damaged tines (1); replace and mount them if necessary.

Basic setting of mower

For "Trailed" version, hydraulic relief adjustment

1

2

KM001-282

„ Lower the mower to the ground.

„ Set the single-acting control unit (1+) to float position.

„ Using the lower links, position the arrow (1) in the centre of the hydraulic cylinder (2).

„ Raise and lower the mower via the single-acting control unit (1+). Check the position of the arrow mark. Correct again if required.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 77

7 Start-up

7.16

Basic setting of mower

For "Trailed" version, mechanical relief adjustment

KM000-560

„ Lower the mower to the ground.

„ Set the single-acting control unit (1+) to float position.

„ Using the lower links, position the arrow (1) in the centre of the link (2).

„ Raise and lower the mower via the single-acting control unit (1+). Check the position of the arrow mark. Correct again if required.

78

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB

advertisement

Related manuals

advertisement

Table of contents