Operation. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges.

Add to My manuals
154 Pages

advertisement

Operation. Krone BA EasyCut F 320 CV, BA EasyCut F 320 CV gez./ges. | Manualzz

8

8.1

8.1.1

Operation

Front guard

8

8.1

Operation

WARNING

Risk of injury due to non-observance of relevant safety notices

If the relevant safety notices are not observed, persons may get seriously injured or killed.

„

To avoid accidents, the basic safety instructions must be read and observed, see

Page 13 .

WARNING

Risk of injury due to non-observance of safety instructions

If the relevant safety routines are not observed, persons may be seriously injured or killed.

„ The safety routines must be read and observed to avoid accidents,

see Page 24 .

WARNING

Risk of injury during operation

If the following notes are not observed, persons could be seriously injured or killed during the operation.

„ Bring the machine into working position before activating the PTO shaft. Make sure that the sliding skids rest on the ground.

„ Instruct bystanders to leave the danger zone of the machine, since there is a risk from ejected foreign objects even with operation of the machine as intended.

„ Proceed with special caution in the vicinity of roads and buildings.

Front guard

WARNING

Risk of injury due to objects being flung out

If the front guard/side guard is folded up during work, objects may be flung out. As a result, people may be seriously injured.

„ Fold down the front guard/side guard.

„ Connect the guard cloths of the front guard and the side guard using the turnlock fasteners.

Folding up the front guard

The front guard can be folded up for repair and maintenance.

EasyCut F 320 CV

Original operating instructions 150000173_09_en-GB 79

advertisement

Related manuals

advertisement

Table of contents